Would anyone be interested?

84_GT350 · 03-19-2001, 04:05 PM

I've discussed a few times on here that my Stang is equipped with a "handicapped" setup (I hate that word...it implies that you can't do something). I just took some pics of these since some of you seemed interested. I was just wondering if anyone would be interested in me posting some of these if they turn out good? If so, how the hell do you post pics on here?

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

03-19-2001, 06:48 PM

I remember that thread on here a few months ago, and I would definitely like to see some good pics if you've got them. Can't help you with posting them up here, though. Sorry...

------------------
Greg
91 LX Convertible

dinomite · 03-19-2001, 07:22 PM

I as well would be interested in seeing them. To post pics here you just use the 'img' tab inside brackets (its ubb code) and point to the picuture wherever it may be. You can put pictures here on mustang works, or find a server somewhere else

03-20-2001, 04:17 AM

I'm interested in seeing this type of set-up 84_GT350.

If you need help posting these pics,just give me a yell through email, I'll get them posted for ya

------------------
Paxton Blown 87GT

2FastLX · 03-20-2001, 09:21 AM

You have to have the images uploaded to the web somewhere. Having a free website setup on MustangWorks for example is a good thing to start because it allows you to do this rather easily.

If you upload the image to a free site here at MustangWorks into an images folder off the main directory for example, the address to the image would be: http://members.mustangworks.com/images/imagename.jpg

After the hard part is done you have to add the UBB code to your post which looks like this:

<IMG>http://members.mustangworks.com/images/imagename.jpg</IMG>

I used these brackets <> to demonstrate. You have to change these brackets <> to these [] for it to work.

------------------
Indiana Stangers Association
Buy your parts here

[This message has been edited by 2FastLX (edited 03-20-2001).]

Green92LX · 03-20-2001, 09:28 AM

OK...explain this one to me like I am an Idiot....where do you go on this site to do this???

------------------
1992 5.0 LX, V-1 S-Trim @8LBS,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Roller Rockers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler
Daily driver: 89 Coupe with 208K plus, BBK shorties,offroad h-pipe,2-chamber flowmasters with dumps,

84_GT350 · 03-20-2001, 05:54 PM

Good deal. I hope to have some developed by the end of the week.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

03-19-2001, 04:05 PM	#1
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Would anyone be interested? I've discussed a few times on here that my Stang is equipped with a "handicapped" setup (I hate that word...it implies that you can't do something). I just took some pics of these since some of you seemed interested. I was just wondering if anyone would be interested in me posting some of these if they turn out good? If so, how the hell do you post pics on here? ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
anyone interested in a regal for drag racing??	ex-lt1-guy	Blue Oval Lounge	12	11-05-2002 01:26 AM
if you're interested	father joe	Blue Oval Lounge	0	06-03-2002 03:03 PM
Ok, Its that time again. I'm on the prowl and interested in everything. Ive searched	EmptyWallet	Windsor Power	4	02-26-2002 06:03 PM
Custom bra, anyone interested? [pics inside]	ekoolaid	Blue Oval Lounge	4	09-20-2001 12:53 PM
Would anyone be interested in trading a Mustang for TurboCoupe?	Indy50LX	Small Ponies	4	09-11-2000 03:55 PM

03-19-2001, 06:48 PM	#2
cleangreenmachine Guest Posts: n/a	I remember that thread on here a few months ago, and I would definitely like to see some good pics if you've got them. Can't help you with posting them up here, though. Sorry... ------------------ Greg 91 LX Convertible

03-19-2001, 07:22 PM	#3
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	I as well would be interested in seeing them. To post pics here you just use the 'img' tab inside brackets (its ubb code) and point to the picuture wherever it may be. You can put pictures here on mustang works, or find a server somewhere else

03-20-2001, 04:17 AM	#4
Mustanguy Guest Posts: n/a	I'm interested in seeing this type of set-up 84_GT350. If you need help posting these pics,just give me a yell through email, I'll get them posted for ya ------------------ Paxton Blown 87GT

03-20-2001, 09:21 AM	#5
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	You have to have the images uploaded to the web somewhere. Having a free website setup on MustangWorks for example is a good thing to start because it allows you to do this rather easily. If you upload the image to a free site here at MustangWorks into an images folder off the main directory for example, the address to the image would be: http://members.mustangworks.com/images/imagename.jpg After the hard part is done you have to add the UBB code to your post which looks like this: <IMG>http://members.mustangworks.com/images/imagename.jpg</IMG> I used these brackets <> to demonstrate. You have to change these brackets <> to these [] for it to work. ------------------ Indiana Stangers Association Buy your parts here [This message has been edited by 2FastLX (edited 03-20-2001).]

03-20-2001, 09:28 AM	#6
Green92LX Registered Member Join Date: Jun 1999 Location: North Haven,CT Posts: 336	OK...explain this one to me like I am an Idiot....where do you go on this site to do this??? ------------------ 1992 5.0 LX, V-1 S-Trim @8LBS,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Roller Rockers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver: 89 Coupe with 208K plus, BBK shorties,offroad h-pipe,2-chamber flowmasters with dumps,

03-20-2001, 05:54 PM	#7
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Good deal. I hope to have some developed by the end of the week. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s