MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-04-2006, 12:08 AM   #16
84LX89GT
Mustangs
 
84LX89GT's Avatar
 
Join Date: Jul 2000
Posts: 1,938
Default Re: Wtf??? Ford Pos!!!

Quote:
Originally Posted by racerboy88
don't mean to steal your thread, but,
How did you know that your oil pump was on it's way out? I notice the oil pressure gauge in the dash reading low sometimes at idle but moves back to normal when I rev or start driving? Is that a sign that it might be time to change it? I have a 1990 LX with about 147,000KM on it.
My '89 GT i had did that and when i was replacing the oil pump i pulled off the bearing caps and found that the #2 bearing was completely scored, #1 and 3 were pretty bad also - the others showing some scoring and copper but not as bad. Increased clearances in the bearings usually causes low pressure until you rev it up, especially if oil pressure drops after you've warmed it up is a good sign. Another way to test this is to put in a thicker weight oil like 20w50 and see how much oil pressure goes up. A pump with excessive clearance or bad pressure relief valve will have low pressure all the way up in RPM.
__________________
2005 Suzuki Hayabusa GSX1300-R

1980 Ford Thunderbird - 255 V8
ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain
hi-po Mack Truck hood emblem

1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc.

Sold 02/06/04
1989 Mustang GT ET: 13.304@102.29 mph (5-24-03)

Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)
84LX89GT is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford to shut down Windsor casting plant as part of reorganization Phillyfanfrombirth Blue Oval Lounge 6 01-24-2006 10:35 PM
Safety Issue 64 - 70 Mustangs Mach1 Cobra Jet Classic Mustangs 20 07-11-2005 08:06 PM
Thank You FORD! TerryW Blue Oval Lounge 4 04-29-2005 02:41 PM
Before buying a new Ford consider this. Lizard King Blue Oval Lounge 21 03-12-2005 03:24 PM
Changes at Ford??? 93CobraR Blue Oval Lounge 3 11-02-2001 09:20 PM


All times are GMT -5. The time now is 12:29 PM.


SEARCH