MustangWorks.com : Ford Forums - View Single Post

skiwesser · 05-30-2007, 01:40 AM

My friend bought an 89 coupe that had already been swiched to a carb.
He's building a 347 with a main girdle,185 afr heads, long tubes, ect.
Now it had a Torker 2 intake and a 750 holley(not sure about carb),
Is the intake any good as we no nothing about carbs and he only knows chevys (got the mustang itch

)
What cam should he get? He's going with 10.0:1 pistons so should he get a custom cam, he wants it to thump as it'll be 90% strip and we have no inspections here.
Any suggestions appreciated on cam and intake , carb too!!!
Thanks
Wes

05-30-2007, 01:40 AM	#1
skiwesser Registered Member Join Date: Sep 2000 Location: rock hill,S.C. 29730 Posts: 420	Yet another Cam Question My friend bought an 89 coupe that had already been swiched to a carb. He's building a 347 with a main girdle,185 afr heads, long tubes, ect. Now it had a Torker 2 intake and a 750 holley(not sure about carb), Is the intake any good as we no nothing about carbs and he only knows chevys (got the mustang itch ) What cam should he get? He's going with 10.0:1 pistons so should he get a custom cam, he wants it to thump as it'll be 90% strip and we have no inspections here. Any suggestions appreciated on cam and intake , carb too!!! Thanks Wes __________________ 88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306. DYNO TUNED TO 300.97 RWHP 337RWTQ