MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 04-30-2001, 10:26 AM   #1
slo95
Registered Member
 
Join Date: Dec 2000
Posts: 168
Post Head Gasket question

I think I have a blown head gasket...traces of coolant in the oil. No other symptoms, unless excessive/crazy pinging on a warm engine under load is one of them. I guess I have coolant loss, but very very slow. I should say the car was purchased without an overflow bottle and bad ECT, so I know she ran HOT for a while...What other damage might there be? Valves? Rings? Pistons?
I should say it is a stock 95 GT, 85K miles. Also, code scanner came back with cyl balance test with no errors, it passed.

[This message has been edited by slo95 (edited 04-30-2001).]
slo95 is offline   Reply With Quote
Old 04-30-2001, 07:22 PM   #2
slo95
Registered Member
 
Join Date: Dec 2000
Posts: 168
Post

up. (Don't want it to get buried...)

The oil is not milky or cloudy, it is light brown. I do not have bubbles in the radiator nor smoke out the rear and no oil in the radiator. What are some other things to check? (I am getting an air adapter to do a "leak down test."
slo95 is offline   Reply With Quote
Old 05-01-2001, 04:50 AM   #3
84stangLX
Guest
 
Posts: n/a
Post

I'm guessing it could be one of two things. 1: one of the head gaskets is starting to fail and has a small leak. These are the hardest to detect and usually it's hard to diagnose them before they totally fail. A leakdown could give you an indication, but if it's as small as you say it is, you may not see anything.
2: a plugged PCV system will cause condensation to build up in the engine because the vapors have no place to go and it liquifies and looks like there's water/coolant in the oil.
good luck, keep us posted on what you find!
  Reply With Quote
Old 05-01-2001, 04:32 PM   #4
slo95
Registered Member
 
Join Date: Dec 2000
Posts: 168
Post

Well, got the adapter for the leakdown...will do it tonight. As for the PCV, it is new. Any other ideas?
slo95 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1997 Head Gasket newsomed Small Ponies 5 03-29-2003 02:44 PM
302 head gasket ponydude Classic Mustangs 1 07-26-2001 07:37 PM
Which Head Gasket should I use? capri302 Windsor Power 1 05-08-2001 05:33 PM
Head gasket choice for AFR 165's on N/A combo cojonepony Windsor Power 1 03-28-2001 08:30 PM
blew a head gasket on a '93 sable st5150 Small Ponies 0 03-21-2000 09:43 PM


All times are GMT -5. The time now is 04:55 AM.


SEARCH