Yet another next mod question :)
 

Ok I have about $300 to spend after my brake upgrades(maximum motorsport brake upgrade kit). I NEED some more power. http://www.mustangworks.com/interact...rd/biggrin.gif I would like to get some more power N/A but I don't think I will get much for $300, should I just save the $300 for a nitros kit? I don't think I will be doing heads/intake/cam until I get out of college(money issues) in 2 or 3 years and need a new motor(unless mine blows up). Anyway are there any n/a upgrades for $300 that will give me a decent amount of power or should i just save for the nitros... or look into getting a used kit for $300... any and all opinions appreciated....mods are in the sig

------------------
92 AOD GT, K&N, ram air, pulleys, 2 ch. flowmasters, 4:10's, shift kit, 1 5/8 mac longtubes and offroad hpipe 14.249 @ 97.34 mph before the headers and hpipe

Nitrous is a good idea, but if you want to stay NA, then your choices are limited. I did the small mod here and there routine and was routinely disappointed. I would say save just a tad more and get a converter. Mine made worlds of difference and was around $400 or so with the solid input shaft. There is not much else you can do if not doing heads/cam/intake. You could always get some 1.7 or 1.72 rockers. You could also get an intake, I know of a GP on the new Mac for like $300 delivered.

------------------
1991 Mustang GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK chrome cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, 2-C Flows w/ dumps, 4.10's, Steeda STB, for now...

The Original GT-40P Tech Page

How about a stall? If you get a cheaper one and put it in yourself it shouldnt be too much over 300. Just an idea.

------------------
TW Heads, Edlebrock RPM, 75mm TB, 75mm MM, Anderson N-2 cam, stock block, underdrives, paxton regulator, bbk 155 intank, 30lbers, motorsport alum rad msd ignition and coil, 3.73 gear, Tremec 3550, Motorsport HD clutch, K&N, hooker shorties, pacesetter h-pipe, and dynomax cat back, mac upper and lower control arms, no front sway bar. I think that's it. GO ILLINI!!!
Waiting for good weather for new times.