MustangWorks.com - The Ford Mustang Power Source!

Go Back   The Mustang Message Board > Mustang & Ford Tech > Windsor Power > 302 5.0L Engine Tech
Register FAQ Members List Calendar Mark Forums Read

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 08-14-2007, 07:12 AM   #1 (permalink)
5 Point Oh
Registered Member
 
5 Point Oh's Avatar
 
Join Date: Aug 2007
Location: Ogden, UT
Posts: 8
Default engine idles high

since i bought my car the engine has idled high sometimes. it doesn't do it all the time, but when it does it usually idles between 1500-2500 rpm. it does it when i push in the clutch to shift, or when i am stopped at a red light. the only way to get it to idle down is to turn the car off and back on again and it will usually go back and idle normally. i replaced the iac and cleaned the throttle body but can't really come up with anything else. could it be from a vacuum leak somewhere or is it a sensor
5 Point Oh is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 08-14-2007, 08:54 PM   #2 (permalink)
408gt91
408gt91
 
408gt91's Avatar
 
Join Date: Jul 2007
Location: N.H.
Posts: 16
Default Re: engine idles high

could be a leak but thy tend to idle it down.make sure your throttle body blade opens and closes freely,my friends car was doing the same thing and thats what it was.check tps voltage also.
Attached Images
File Type: jpg my motor 012.jpg (222.4 KB, 4 views)
408gt91 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 08-27-2007, 08:07 PM   #3 (permalink)
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 301
Default Re: engine idles high

make sure u have no vaccum leaks....tps should be set at around .90v at closed throttle also tfi could cause an idle problem
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.holley pump w/carter pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,rebuilt world class t5,underdrive pulleys,bassani x-pipe,flowmasters,eibach lowering springs/shocks/struts/swaylinks/swaybar, dvd player and 1,000 watt system
1992 mustang gt
2000 chevy impala
1990 jeep 4x4
goodyear1984 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 08-27-2007, 08:12 PM   #4 (permalink)
88ponyboy3
Registered Member
 
Join Date: Aug 2007
Location: nashville tn
Posts: 7
Default Re: engine idles high

what did you use to clean throttle body ?
88ponyboy3 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
D.S.S or Coast High for new engine Chevysucks Windsor Power 15 11-05-2002 08:33 PM
Help, this 5.0 f-150 idles too high!! Coupe5oh Windsor Power 2 04-06-2002 11:19 AM
need engine guru advise.....high oil psi Old Guy with 87 GT Windsor Power 22 01-29-2002 05:32 PM
high engine temp?!? kenneth kimble Windsor Power 8 07-07-2001 11:37 PM
engine knocking at high rpm homerojr Windsor Power 6 03-26-2001 09:57 PM


All times are GMT -5. The time now is 01:50 AM.


SEARCH