stock heads blown..now what?

fongo · 08-18-2008, 07:00 PM

What a bummer! After 177K on the odometer and a clean engine (never red-lined or raced!), they tell me at the shop that my cylinder heads are gone (white smoke coming out on exhaust, brown sludge on the oil filter, coolant sipping into engine..ouch).
I need recommendations on a new pair of heads with the following considerations:
1. Low to mid band torque (1500 - 35000 rpm)'
2. 50 state legal (emissions)
3. Quick robust response and durable (not intending to race)
4. Direct bolt on to OEM block (w/ little to no modifications) and stock upper and lower intake.
5. NMT $1400 pair
6. Fully assembled.
I want something I can bolt on myself over the course of a few weekends or perhaps with a buddy.
A friend of mine recommended the Trick Flow or GT40X heads but I'd appreciate any suggestions. Thanks!

goodyear1984 · 08-18-2008, 08:19 PM

i wouldnt buy gt40x heads, for a little more you can get better heads.i would get afr 165 or the trick flow 170.that would be the best size head for the stock bottom end.there around 1200-1350 for assembled set.you should also put a cam in you will allready have the engine apart and the cam will give the full potential of the heads.also new lifters,pushrods,and roller rockers

Dog5ohfun · 09-09-2008, 02:36 AM

Bang for the buck would be to call Power Heads in California. They usually have ads in Muscle Mustangs. They are reworked stock E7TE heads. When I bought mine they were about $ 850 without core. If you are going to build this car in the future go with AFR 165's or
185's. Good luck

goodyear1984 · 09-10-2008, 06:58 PM

the afr 185 wont fit the stock piston valve notches.if you are looking for stock heads go on ebay and get a rebuilt set for less then 200.but dont spend more then 200 on iron heads

teal9550 · 11-27-2008, 05:34 PM

i used power heads E7's on my 95 gt with a stock cam & bottom end with 1.7 rockers tfs intake 24lb injectors 65mm tb and 100 shot of nos(dry kit) went 12.49 @ 114mph on drag raidials. this was a daily driver and everything installed like stock and no questions at smog time

08-18-2008, 07:00 PM	#1 (permalink)
fongo Registered Member Join Date: Jan 1999 Location: Farmingdale, NY Posts: 135	stock heads blown..now what? What a bummer! After 177K on the odometer and a clean engine (never red-lined or raced!), they tell me at the shop that my cylinder heads are gone (white smoke coming out on exhaust, brown sludge on the oil filter, coolant sipping into engine..ouch). I need recommendations on a new pair of heads with the following considerations: 1. Low to mid band torque (1500 - 35000 rpm)' 2. 50 state legal (emissions) 3. Quick robust response and durable (not intending to race) 4. Direct bolt on to OEM block (w/ little to no modifications) and stock upper and lower intake. 5. NMT $1400 pair 6. Fully assembled. I want something I can bolt on myself over the course of a few weekends or perhaps with a buddy. A friend of mine recommended the Trick Flow or GT40X heads but I'd appreciate any suggestions. Thanks! __________________ 1993 GT, MAC Fenderwell Cold Air Induction; Accel dist.,Splitfire plugs, BBK: 1 5/8 unequal length shorties, hi flow H-pipe w/ cats; Flowmasters 2 chamber American Thunder catback system, Motorsports 3-core radiator, 180º thermostat, BBK adj. clutch quad...the rest is bone stock!..but more mods to come!!

08-18-2008, 08:19 PM	#2 (permalink)
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 307	Re: stock heads blown..now what? i wouldnt buy gt40x heads, for a little more you can get better heads.i would get afr 165 or the trick flow 170.that would be the best size head for the stock bottom end.there around 1200-1350 for assembled set.you should also put a cam in you will allready have the engine apart and the cam will give the full potential of the heads.also new lifters,pushrods,and roller rockers __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.holley pump w/carter pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,rebuilt world class t5,underdrive pulleys,bassani x-pipe,flowmasters,eibach lowering springs/shocks/struts/swaylinks/swaybar, dvd player and 1,000 watt system 1992 mustang gt 2000 chevy impala 1990 jeep 4x4

09-09-2008, 02:36 AM	#3 (permalink)
Dog5ohfun Registered Member Join Date: Feb 2002 Location: Arlington, Washington Posts: 92	Re: stock heads blown..now what? Bang for the buck would be to call Power Heads in California. They usually have ads in Muscle Mustangs. They are reworked stock E7TE heads. When I bought mine they were about $ 850 without core. If you are going to build this car in the future go with AFR 165's or 185's. Good luck __________________ Black 1990 LX DSS Racing Super Pro Bullit 331, AFR 185, Anderson B31 Cam, 1.6 DSS rockers, Cobra Intake w/ 2 phenolic spacer, Aluminum DS, 3.73 gears, Tremec 3550, Lakewood SFI Bellhousing, MSD Digital 6+, Spintech Side Exhaust,

09-10-2008, 06:58 PM	#4 (permalink)
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 307	Re: stock heads blown..now what? the afr 185 wont fit the stock piston valve notches.if you are looking for stock heads go on ebay and get a rebuilt set for less then 200.but dont spend more then 200 on iron heads __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.holley pump w/carter pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,rebuilt world class t5,underdrive pulleys,bassani x-pipe,flowmasters,eibach lowering springs/shocks/struts/swaylinks/swaybar, dvd player and 1,000 watt system 1992 mustang gt 2000 chevy impala 1990 jeep 4x4

11-27-2008, 05:34 PM	#5 (permalink)
teal9550 Registered Member Join Date: Feb 2006 Posts: 3	Re: stock heads blown..now what? i used power heads E7's on my 95 gt with a stock cam & bottom end with 1.7 rockers tfs intake 24lb injectors 65mm tb and 100 shot of nos(dry kit) went 12.49 @ 114mph on drag raidials. this was a daily driver and everything installed like stock and no questions at smog time

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cylinder heads for blown 331	Dave_mustang_50	Windsor Power	7	06-18-2003 04:45 PM
gt40 heads vs stock heads	scale	Windsor Power	6	04-03-2003 06:58 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 05:28 PM
Damaged heads or blown head gasket	silverstang96	Modular Madness	4	10-15-2001 09:50 AM
? on stock heads	vande97	Windsor Power	12	06-22-2001 12:35 AM

Sponsored Links