Swapping Engines/Transmission

[Trish_B]

I have a motor and transmission from a 03 Cobra (husband wrecked the car..but motor and transmission appear to be ok) that I'd like to transplant into another mustang body. At first we were going to drop it into his 96' cobra but were receiving feedback that the differences between the 96 and 03 mountings would cause us to fabricate a lot of connections.

My question is: If I bought a pony..say 99 and up..would those bodies accommodate the motor and transmission (6 speed) ok? Or what would you all advise?

[bad289]

Check out August '07 Hot Rod magizine. There is a good story on swapping "mod" motors into older mustangs.

[thors_1]

a guess but I'm putting a 5.4 in mine and I looked at a cobra engine to go in mine so here's what I think.for sure a 99 up and if yours is a cobra it's a dohc & a standard. I'd look for a 99 up that had a dohc and was also a standard. other wise you'l need to change/add to the wireing from a sohc to work with your dohc, need the cobra ecm as well. I'm not a mechanic so you better ask someone with knowledge.

[blue00gt]

As far as physically putting that stuff in another car, the drivetrain will bolt right into any Fox based car with the right k-member and modification to the tranny cross-member. The main issue people run into is the differences in the wiring.
For my swap I had a donor car so I was able to use all that stuff on mine.
Also, someone mentioned that you need the Cobra ECM, which is not necessarily true. I know several people who have used their 99-04 GT ECM with a custom tune and they run fine. Just a pain to figure out the wiring.

[thors_1]

Originally Posted by blue00gt

As far as physically putting that stuff in another car, the drivetrain will bolt right into any Fox based car with the right k-member and modification to the tranny cross-member. The main issue people run into is the differences in the wiring.
For my swap I had a donor car so I was able to use all that stuff on mine.
Also, someone mentioned that you need the Cobra ECM, which is not necessarily true. I know several people who have used their 99-04 GT ECM with a custom tune and they run fine. Just a pain to figure out the wiring.

I'm switching out my 4.6L to a 5.4L. both are 2 valve engines. If I install a.... cobra 4.6L dohv I need a different ECM. if you can give a link to where you can get your ECM redone/custom tuned from a single to a double it would save a lot of people some cash.I've never heard of anyone doing it, but then I'm not a mechanic and know nothing about the newer electrical on a car.

[explicitone]

Originally Posted by thors_1

I'm switching out my 4.6L to a 5.4L. both are 2 valve engines. If I install a.... cobra 4.6L dohv I need a different ECM. if you can give a link to where you can get your ECM redone/custom tuned from a single to a double it would save a lot of people some cash.I've never heard of anyone doing it, but then I'm not a mechanic and know nothing about the newer electrical on a car.

you dont need a new ECU... you just need for a good tuner to tune it.... a buddy of mine has a 4v with a C4 in a 98gt still using the stock ECU

[explicitone]

Originally Posted by Trish_B

I have a motor and transmission from a 03 Cobra (husband wrecked the car..but motor and transmission appear to be ok) that I'd like to transplant into another mustang body. At first we were going to drop it into his 96' cobra but were receiving feedback that the differences between the 96 and 03 mountings would cause us to fabricate a lot of connections.

My question is: If I bought a pony..say 99 and up..would those bodies accommodate the motor and transmission (6 speed) ok? Or what would you all advise?

the motor will work fine in the 96 cobra.... you will need a good tune.... trans mount from a 03 cobra... depending on if you keep the stock style return syle fuel system or returnless then you might need a new ECU

one thing you will need is a different hood

the list for either swap is long and can get pricey