2.3 FilterCharger?

gibson89LX · 07-30-2001, 03:56 PM

Im a newbie (just got the stang like a week ago) anyway. I've been told by some that you can use the K&N filtercharger made for the 5.0 in the 2.3 being as the airbox is in the same position. Also ive seen that one can just take off the airbox assembly and attatch a filter cone(http://www.geocities.com/motorcity/6325/knins.htm). are these true? if not is there any way i can put a filtercharger on my 2.3? Please drop a line here or @ mkepps@nls.net

------------------
1989 2.3L LX

84LX89GT · 08-03-2001, 03:22 AM

I think the inlet hose is 2" on the inside diameter and the 5.0L has larger diameter EVERYTHING on the intake so i don't know if a "cold air intake" will work on your car. The intake for a 2.3L is designed to be very quiet and is VERY restrictive. If you can get some flexible hose you may be able to make an adapter for the 5.0L designed filter assembly to the mass air meter (using hose clamps to seal it). Another modification you can make is to get a throttle body off of a 3.8L thunderbird, it's larger so it flows more air (from what i hear, but i'm not 100% sure it'll work, but i think it will). If you have the intake tract muffler (the big round thing in between the throttle body and mass air meter attached to two hose pieces) with the Ford logo on it you can cut out the inside (it goes down from 2" inside diameter to 1 1/2" because of it) with an exacto knife and you'll pick up some power. If you have the hard round one, you could easily pick up a Ford logo one from a junkyard for real cheap or you could find some pipe or something to put between the hoses. Good luck!

------------------
previous name: 84stangLX
'84 Mustang 5.0 LX
my LX
'89 Mustang GT
my GT

07-30-2001, 03:56 PM	#1 (permalink)
gibson89LX Registered Member Join Date: Jul 2001 Posts: 1	2.3 FilterCharger? Im a newbie (just got the stang like a week ago) anyway. I've been told by some that you can use the K&N filtercharger made for the 5.0 in the 2.3 being as the airbox is in the same position. Also ive seen that one can just take off the airbox assembly and attatch a filter cone(http://www.geocities.com/motorcity/6325/knins.htm). are these true? if not is there any way i can put a filtercharger on my 2.3? Please drop a line here or @ mkepps@nls.net ------------------ 1989 2.3L LX

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

08-03-2001, 03:22 AM	#2 (permalink)
84LX89GT Money Waster Join Date: Jul 2000 Location: Tucson, AZ Posts: 1,933	I think the inlet hose is 2" on the inside diameter and the 5.0L has larger diameter EVERYTHING on the intake so i don't know if a "cold air intake" will work on your car. The intake for a 2.3L is designed to be very quiet and is VERY restrictive. If you can get some flexible hose you may be able to make an adapter for the 5.0L designed filter assembly to the mass air meter (using hose clamps to seal it). Another modification you can make is to get a throttle body off of a 3.8L thunderbird, it's larger so it flows more air (from what i hear, but i'm not 100% sure it'll work, but i think it will). If you have the intake tract muffler (the big round thing in between the throttle body and mass air meter attached to two hose pieces) with the Ford logo on it you can cut out the inside (it goes down from 2" inside diameter to 1 1/2" because of it) with an exacto knife and you'll pick up some power. If you have the hard round one, you could easily pick up a Ford logo one from a junkyard for real cheap or you could find some pipe or something to put between the hoses. Good luck! ------------------ previous name: 84stangLX '84 Mustang 5.0 LX my LX '89 Mustang GT my GT

Sponsored Links