Line Lock ?'s

GhOsT6_9 · 03-14-2004, 04:53 PM

I'm just about to start installing a line lock kit on my 89 Stang, but I haven't been able to figure where I have to cut into the lines to put the solenoid.

Where abouts do you cut into the line, and can I do it with just a single solenoid or will I have to get a 2nd??

Any info would be great.

juiceman · 03-19-2004, 03:26 AM

you should have recieved directions with the solenoid, but you come out of your master cyl go into the solenoid, out of the solenoid into the proportioning valve.

03-14-2004, 04:53 PM	#1
GhOsT6_9 Registered Member Join Date: May 2000 Location: Ontario,Canada Posts: 233	Line Lock ?'s I'm just about to start installing a line lock kit on my 89 Stang, but I haven't been able to figure where I have to cut into the lines to put the solenoid. Where abouts do you cut into the line, and can I do it with just a single solenoid or will I have to get a 2nd?? Any info would be great. __________________ 1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Line Lock ?	Blownpony91	Windsor Power	2	10-07-2004 07:16 PM
line lock hook up??	pedley	Windsor Power	2	10-06-2003 12:22 PM
Line Lock Help	RoadWarrior	Windsor Power	7	09-16-2002 06:34 AM
Line lock question-which line goes to front brakes	Stang_ROTY	Windsor Power	1	05-20-2002 03:53 PM
Line lock is spinning me in circles...	Chris_H	Windsor Power	8	02-18-2001 08:40 AM

03-19-2004, 03:26 AM	#2
juiceman Registered Member Join Date: Jan 2001 Location: ny Posts: 197	you should have recieved directions with the solenoid, but you come out of your master cyl go into the solenoid, out of the solenoid into the proportioning valve.