Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-21-1999, 03:11 PM
|
#1 |
|
Registered Member
Join Date: Jun 1999
Location: apple valley, ca usA
Posts: 12
|
DPO hacks and other stuff....
among the other hacks done by the DPO of my car he replumbed around the heater core, i don't know if the core is plugged or if it leaks i haven't hooked it back up...does anybody know which pipe is the inlet and which is the outlet? right-left configuration
it's an 87 mustang 2.3 with nothing special on it. yet... tia |
|
|
|
06-23-1999, 07:04 PM
|
#2 |
|
Registered Member
Join Date: Sep 1998
Location: Tallahassee, Fl., US
Posts: 130
|
Shouldn't matter, just set it in the best way it fits. Essentialy the heater core is just a small radiator so it doesn't matter which way fluids flow.
Brad. ------------------ Brad 88lx 2.3T soon to have 350hp www.turboford.org |
|
|
|
|
06-27-1999, 01:28 PM
|
#3 |
|
Registered Member
Join Date: May 1999
Location: Union, Ohio, USA
Posts: 582
|
Yep, it does not matter which one goes where.
------------------ mark brooks. '85 gt hatch,ssm bars,draglites,msd ignition,dual quad setup,8.8 rear3.73,electric fuel pump,supertrapp exhaust,motorsport trans,many many more... |
|
|
|
|
06-28-1999, 11:14 AM
|
#4 |
|
Registered Member
Join Date: Jun 1999
Location: apple valley, ca usA
Posts: 12
|
i have 2 hoses, one from the waterpump, one from the thermostat housing, then one that serves as the heater or cooler for the TB. does the pump hose go to one side and the bypass to the other, and then where do i tee in for the TB cooler...
tia |
|
|
|
|
06-28-1999, 05:50 PM
|
#5 |
|
Registered Member
Join Date: Sep 1998
Location: Tallahassee, Fl., US
Posts: 130
|
I know exactly what you are describing, I had to do it to mine, but unfortuanetly I don't remember how I did it. Give me some time and I can find out.
------------------ Brad 88lx 2.3T soon to have 350hp www.turboford.org |
|
|
|
|
06-29-1999, 03:00 PM
|
#6 |
|
Registered Member
Join Date: Jun 1999
Location: apple valley, ca usA
Posts: 12
|
ok cool...it's not a big rush as the tranny is on the bench and the car is up on the lift
 ...but would like to get it all put back together before i put it on the road...not that i need a heater right now...it's 107 outside  |
|
|
|
|
07-01-1999, 05:11 PM
|
#7 |
|
Registered Member
Join Date: Sep 1998
Location: Tallahassee, Fl., US
Posts: 130
|
I had the hose going from the water pump to the heater core, from the heater core (this is the 2nd line) to a T connector going to the places u mentioned.
I will try to find a diagram to better explain this. Brad. ------------------ Brad 88lx 2.3T soon to have 350hp www.turboford.org |
|
|
|
 |
|
|