© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-27-1999, 08:06 PM | #1 |
Registered Member
Join Date: May 1999
Posts: 19
|
more turbo swap questions
I am almost ready to swap the engine out of my 90 lx. I almost have the engine completely rebuilt. First of all, Jett in reply to my other post said that I didn't need the octane switch, all I had to do was to turn up/down the boost when I run different gas. How do I change the boost? Also when I leave things like that out of the wiring harness is it going to cause any problems with the computer and way the engine runs. To make the swap a little easier I was just going to unbolt the fuel injetion/intake manifold and set it of to the side while I installed the turbo engine and then bolt it on.(the original turbo manifold is slighly corroded but salvagable, but if i don't have to clean it up all the better plus one of the injectors has junk around the nozzle, who knows how well it works.) Are the two compatible, are the injectors the same and it might just be my imagination but the throttle bodys look different? I also need to know the pin numbers for the wiring harness, n/a pin number to 88 T.C computer pins. Any information or tips about the swap are greatly appriciated.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2.3L turbo 4 swap? | slag | Small Ponies | 1 | 03-09-2002 03:55 PM |
turbo swap question | tireburner163 | Blue Oval Lounge | 1 | 10-14-2001 03:05 PM |
Speed Innovations Twin Turbo Kit Questions??? | BowTie Eater 5 Liter | Windsor Power | 1 | 07-17-2001 11:07 PM |
2.3 turbo swap | frankiebonzz | Small Ponies | 0 | 06-01-2000 07:44 PM |
2.3L Turbo Engine Swap | Doobie | Small Ponies | 3 | 06-06-1999 12:49 PM |