fuel upgrades

[HP400RW]

i wanted to upgrade my fuel system and i was wondering if my set up i want to get would do good or if i should do anything different.

i have some upgrades already like 76mm mass air, 70mm TB, edelbrock performer intake, k&n, underdrive pulleys, full exhaust, and 4.10 gears.

my set up was to get 24lb injectors, 190lph fuel pump and a fuel regulator.

is there anything diff i should get like some people were telling me to get 155lph for my set up but would 190 be better

thanks

[ArtMan]

Yes that seems fine for what you have now. But what's you plan for the future? If you are going to add a power adder, you would have to upgrade again.

Maybe that's not in the stars or maybe its far enough down the road to put off the other requisite upgrades.

Bottom line: the fuel set-up you mentioned would be fine for what you have now.

If you are going to get a 155lph...then you might as well get a 190lph one. And you don't really need 24lb. injectors with the set up you have. You are still running stock cam and cylinder heads...the 24lb. injectors would do nothing for you until you finish out the "entire package"...heads/cam/intake. Even then, many people run the 19lb. injectors with h/c/i. 88workcar mentioned in the other post "24# injectors"...that the 19s are good up to around 400hp. I've heard they are good up to 320-350hp. Either way...you don't need the bigger injectors...yet.