Rear main seal on 87 2.3L

Radon · 01-29-2001, 05:51 PM

How difficult, what tools needed, and what costs involved?

It's leaking about 4L/week now.

87 2.3L LX Coupe, Automatic...

PNYXPS66 · 02-20-2001, 03:08 PM

The seal itself is not expensive, about $10 at any parts store. It is a one piece rubber coated metal seal and can be removed with a small flathead screwdriver or a small punch that has a 90 degree bend (this is what I use). The PITA (Pain In The A--) is getting to it. You must remove the tranny. I recommend if you have a manual you also replace the pilot bearing, clutch assembly, throwout bearing, and have your flywheel turned at the same time if you have any amount of mileage on it after the leak started. Likelihood is oil has been slung onto the clutch plate and has glazed it, therefore it's best to replace it now while you have it apart; I asure you you won't want to do this again soon! However, the savings on doing it yourself will help you with other projects you have on the fire. Hope this helps.

------------------
Pony Express 66
God Speed and keep it between the lines!

01-29-2001, 05:51 PM	#1 (permalink)
Radon Registered Member Join Date: Sep 2000 Location: Calgary, Alberta, Canada Posts: 68	Rear main seal on 87 2.3L How difficult, what tools needed, and what costs involved? It's leaking about 4L/week now. 87 2.3L LX Coupe, Automatic...

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
advice on rear main seal	Conman	Windsor Power	7	07-25-2002 10:15 PM
Rear main seal ....(semi-long)	Shotgun28	Windsor Power	1	03-13-2001 02:04 PM
Need help quick!!! Rear main seal install....	TROYXTROY	Windsor Power	5	01-26-2001 08:58 PM
Rear Main Seal	diablopony	Classic Mustangs	5	01-15-2001 03:16 PM
rear main seal	66fastback	Classic Mustangs	2	07-04-1999 11:08 PM

02-20-2001, 03:08 PM	#2 (permalink)
PNYXPS66 Registered Member Join Date: Feb 2001 Location: Beaufort,SC,USA Posts: 72	The seal itself is not expensive, about $10 at any parts store. It is a one piece rubber coated metal seal and can be removed with a small flathead screwdriver or a small punch that has a 90 degree bend (this is what I use). The PITA (Pain In The A--) is getting to it. You must remove the tranny. I recommend if you have a manual you also replace the pilot bearing, clutch assembly, throwout bearing, and have your flywheel turned at the same time if you have any amount of mileage on it after the leak started. Likelihood is oil has been slung onto the clutch plate and has glazed it, therefore it's best to replace it now while you have it apart; I asure you you won't want to do this again soon! However, the savings on doing it yourself will help you with other projects you have on the fire. Hope this helps. ------------------ Pony Express 66 God Speed and keep it between the lines!

Sponsored Links