removing post in the mass air

Brett_C · 04-17-1999, 04:16 PM

has anybody removed the post in the mass air cylinder? I am thinking about doing that this weekend and was wondering if it is easy or a pain in the a$$.
Thanks

silverGT · 04-17-1999, 11:27 PM

I have removed the post from the mass air and followed the instructions from www.mustangworld.com in the how to section. not a real big advantage, but small increase in throttle resp!

Brett_C · 04-19-1999, 03:40 PM

how hard was it to do? How long did it take?

silverGT · 04-24-1999, 03:07 PM

i used a hacksaw blade and a dremmel tool.
it took about 2 hours to complete, that is from the time of removal to reinstall.

04-17-1999, 04:16 PM	#1 (permalink)
Brett_C Registered Member Join Date: Feb 1999 Location: Metairie, Louisiana Posts: 25	removing post in the mass air has anybody removed the post in the mass air cylinder? I am thinking about doing that this weekend and was wondering if it is easy or a pain in the a$$. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Im a mass air retard. Help me out.	Dark_5.0	Windsor Power	4	11-26-2003 05:42 PM
post count poll	82 GT	Blue Oval Lounge	25	09-02-2002 12:21 PM
Post Counting?	lx mike	Blue Oval Lounge	16	01-21-2002 08:09 PM
mass air 87GT conversion	greydan	Windsor Power	3	01-02-2002 06:57 PM
new computer& mass air meter=morepower!	stangbang	Windsor Power	2	06-06-2001 03:59 AM

04-17-1999, 11:27 PM	#2 (permalink)
silverGT Registered Member Join Date: Apr 1999 Location: Dallas, Texas USA Posts: 2	I have removed the post from the mass air and followed the instructions from www.mustangworld.com in the how to section. not a real big advantage, but small increase in throttle resp!

04-19-1999, 03:40 PM	#3 (permalink)
Brett_C Registered Member Join Date: Feb 1999 Location: Metairie, Louisiana Posts: 25	how hard was it to do? How long did it take?

04-24-1999, 03:07 PM	#4 (permalink)
silverGT Registered Member Join Date: Apr 1999 Location: Dallas, Texas USA Posts: 2	i used a hacksaw blade and a dremmel tool. it took about 2 hours to complete, that is from the time of removal to reinstall.

Sponsored Links