MustangWorks.com : Ford Forums - View Single Post - c-4

Capri306 · 05-05-1999, 02:08 PM

Depends. Does the converter & converter (bell) housing match up? I know for a fact the housing on my 3.3L is very unique, and you can't find 'em anywhere! You'll have to use a ruler and measure where the tranny bolts up, then if it does match, there shouldn't be a problem. Also, check the distance from the crossmember to the back of the engine. It should also be the same on the C4 you plan on bolting up. Good luck!

------------------
Capri306
1979 Mercury Capri
I can roast 'em off the line & squawk 'em in second!
3.3L --- C4 w/ B&M Shift Improver Kit, rebuilt with TCI stuff --- 2.73
--The only paid mechanic in high school auto shop--
"Yes, officer, I only have 85 horsepower! I couldn't have been going 98!"

05-05-1999, 02:08 PM	#2
Capri306 Moderator Join Date: Sep 1998 Location: Grand Rapids, Michigan, USA Posts: 1,001	Depends. Does the converter & converter (bell) housing match up? I know for a fact the housing on my 3.3L is very unique, and you can't find 'em anywhere! You'll have to use a ruler and measure where the tranny bolts up, then if it does match, there shouldn't be a problem. Also, check the distance from the crossmember to the back of the engine. It should also be the same on the C4 you plan on bolting up. Good luck! ------------------ Capri306 1979 Mercury Capri I can roast 'em off the line & squawk 'em in second! 3.3L --- C4 w/ B&M Shift Improver Kit, rebuilt with TCI stuff --- 2.73 --The only paid mechanic in high school auto shop-- "Yes, officer, I only have 85 horsepower! I couldn't have been going 98!"