MustangWorks.com : Ford Forums - View Single Post

Tang89 · 03-03-2000, 11:27 AM

I have a 89, 2.3L, LX. When the engine is idleing, and I pull number 3 plug wire off, there is no change in the rpm of the engine. The plug is firing and there is compression. When I pull the plug, it is wet. I replaced the plug, wire, and checked the distributor. All is well there. When I put it into gear, the engine rocks really bad due to this not firing. I leaning towards a bad fuel injector. I have a set of injectors for a 1988 Bronco II, Does anyone know if these injectors are the same as the Mustang 2.3L? Does anyone have any other ideas as to what may be my problem?

03-03-2000, 11:27 AM	#1
Tang89 Registered Member Join Date: Mar 2000 Location: Dansville, MI, US Posts: 3	EFI I have a 89, 2.3L, LX. When the engine is idleing, and I pull number 3 plug wire off, there is no change in the rpm of the engine. The plug is firing and there is compression. When I pull the plug, it is wet. I replaced the plug, wire, and checked the distributor. All is well there. When I put it into gear, the engine rocks really bad due to this not firing. I leaning towards a bad fuel injector. I have a set of injectors for a 1988 Bronco II, Does anyone know if these injectors are the same as the Mustang 2.3L? Does anyone have any other ideas as to what may be my problem?