What size belt for bypassed p/s??and race with wrx

Coupe5oh · 04-09-2002, 03:29 PM

Anyone remember the thread with the mearsurement? I need to bypass my p/s, and i already bypassed the smogpump with an 84.? belt, if anyone knows this right off hand, help me out.

I have a race with a wrx subaru at the track tommorrow, the guy was going 13.6's pretty stock, and he modded it and went 13.2 @ 101, he had to remove some mods since he had dealer work done, he said it will be in stock form, at least nothing major on the boost, i believe him to a certain extent, listen up guys, this guy talks smack, and has beat a heads and cam mustang on the street, and talks smack? i cant let a 4 banger smoke me? i figure with the short belt, a good burnout on the sport pros, hard launch, I can maintain a 13.55 or so, and keep him at bay.

OUTPLAYN · 04-09-2002, 07:23 PM

Here's something to help..

My90GT · 04-09-2002, 09:10 PM

You should use the 70.5" short belt this will bypass the smog pump and power steering.You should gain 2 tenths decrease in ET and 1.5mph increasein trap speed on 1/4mile as tested on a 90 5.0 5spd with slicks. good luck hope this works.

Coupe5oh · 04-09-2002, 09:53 PM

thanx, i found this in my archive of papers on my desk, so im going with a 70.5, didnt think i would get a reply.

I cant lose to this punk, it will be on tape too, i just hope i can hook these tires up, cuz i dont have e.t. streets anymore........

Coupe5oh · 04-10-2002, 03:03 PM

nope nope, nope, the 70.5 does not fit, actually it sets on the end of the tensioner, and still works, but wobbles, it's just a tad loose, im going back up to autozone, should have just done it in the parking lot. thnx anyway, im gonna try a 70.0 or .3

04-09-2002, 03:29 PM	#1
Coupe5oh Registered Member Join Date: Nov 2001 Location: SanAntonio, Tx Posts: 734	What size belt for bypassed p/s??and race with wrx Anyone remember the thread with the mearsurement? I need to bypass my p/s, and i already bypassed the smogpump with an 84.? belt, if anyone knows this right off hand, help me out. I have a race with a wrx subaru at the track tommorrow, the guy was going 13.6's pretty stock, and he modded it and went 13.2 @ 101, he had to remove some mods since he had dealer work done, he said it will be in stock form, at least nothing major on the boost, i believe him to a certain extent, listen up guys, this guy talks smack, and has beat a heads and cam mustang on the street, and talks smack? i cant let a 4 banger smoke me? i figure with the short belt, a good burnout on the sport pros, hard launch, I can maintain a 13.55 or so, and keep him at bay. __________________ Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph

04-09-2002, 09:10 PM	#3
My90GT Registered Member Join Date: Apr 2002 Posts: 2	You should use the 70.5" short belt this will bypass the smog pump and power steering.You should gain 2 tenths decrease in ET and 1.5mph increasein trap speed on 1/4mile as tested on a 90 5.0 5spd with slicks. good luck hope this works. __________________ My90gt

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Serpine belt size	stock89	Windsor Power	1	06-10-2004 08:11 AM
Belt size for pulleys	my9250GT	Windsor Power	7	01-22-2003 11:47 AM
What size belt with underdrive pullies, 130A alt. & no A/C	Kamaro Killer	Windsor Power	3	07-25-2002 11:43 PM
what size belt do I need??	82 GT	Windsor Power	0	03-24-2001 09:55 AM
Belt size w/ No P.S.	StreetRacin89Stang	Windsor Power	1	02-19-2001 06:34 AM

04-09-2002, 07:23 PM	#2
OUTPLAYN Registered Member Join Date: Aug 2001 Location: Genoa,IL Posts: 79	Here's something to help..

04-09-2002, 09:53 PM	#4
Coupe5oh Registered Member Join Date: Nov 2001 Location: SanAntonio, Tx Posts: 734	thanx, i found this in my archive of papers on my desk, so im going with a 70.5, didnt think i would get a reply. I cant lose to this punk, it will be on tape too, i just hope i can hook these tires up, cuz i dont have e.t. streets anymore........

04-10-2002, 03:03 PM	#5
Coupe5oh Registered Member Join Date: Nov 2001 Location: SanAntonio, Tx Posts: 734	nope nope, nope, the 70.5 does not fit, actually it sets on the end of the tensioner, and still works, but wobbles, it's just a tad loose, im going back up to autozone, should have just done it in the parking lot. thnx anyway, im gonna try a 70.0 or .3