© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
02-07-2002, 08:04 PM | #1 |
Registered Member
Join Date: Feb 1999
Location: Tigard, OR
Posts: 70
|
best mods for 2k 3.8v6
what are the best mods for a 3.8 v6. its a friend of mine, and he already has a full exahust, except headers, and a k&n. He is going to get an electric fan, and pullies. Any other mods that would be good to do? Heads? New intake manifald? what is the best to do.
Thanks
__________________
89 Mustang GT 93 Bronco 4" lift, 33's Coming soon: 2" more 35's nerf bars off-road lights(possible brush guard) tube frame rear bumper custom dual side exhaust |
02-09-2002, 12:49 PM | #2 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
best mod
drop in a v8
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
02-09-2002, 12:51 PM | #3 |
Registered Member
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
|
just pickin bro
just jokin man, procharger make an intercooled superchared kit with 11 psi is supposed to bump you to almost 345hp with and upgraded fuel system, thats on fast v6!
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock |
02-10-2002, 10:58 AM | #4 |
Registered Member
Join Date: Feb 2002
Posts: 9
|
Maybe upgrade the intake to a CAI. I would go with some gears and t-lok. I'd be looking for some suspension parts to help plant the power on the ground. Also the supercharger.
__________________
http://www.dcmustang00.cjb.net/ http://www.stungbymystangmotorsports.com/ |
02-13-2002, 09:59 AM | #5 |
Registered Member
Join Date: Feb 2002
Location: Atlanta, GA
Posts: 44
|
CAI Information
Don't bother with a CAI kit, they are a waste of money. Either get just a K&N filter, or a new mas-air sensor kit. All you are getting from the Mac and other CIA kits is a K&N filter and chrome to dress up the engine compartment. I'll copy my post from another forum:
When it comes to a CAI system, I would avoid any kit that uses the stock mass-air housing (such as the Mac cold air kit). The stock mass-air housing is the most restrictive part of the intake. A new K&N airfilter will add about 2-3 HP by itself. A CAI kit that uses the stock MAS housing provides the same HP gain so long as you are using a stock air filter. These kits are providing you with nothing more than a K&N filter and a fancy tube to replace the rubber hose. The kits do not provide any benefit above the stock intake with a K&N filter. If you want REAL HP gains, look into a new mass-air sensor kit. Check out C&L performance (http://www.cnlperformance.com). Their kit provides 6-9 HP gain for a little more money and replaces the mass-air housing with a larger, 73mm piece. Don't waste your money on a CAI kit, just buy a K&N filter for the same HP gain or buy a real intake kit. I've got the C&L kit and it does work. If you are going to add a larger throttle body at some point, this kit will feed it more air than stock or a CAI kit. Try this test for yourself. Drive the car for 30 minutes or more to get the engine nice and warm. Then remove the rubber intake hose behind the air cleaner and feel the temp. of the aluminum mass-air tube inside the air cleaner box. IT will be cold to the touch. So, if the MAS housing is cold when the engine is hot, do you think a CAI system is really isolating the air cleaner from the engine heat? If it is, it's not enough to make a difference in performance. Also, the mass-air sensor works in conjunction with the temp. sensor in the intake to determine how much air to flow through the throttle body. If a CAI is really providing colder air, the temp. sensor will adjust the TB accordingly, which will cancel out the effect of the colder air. The only way to increase air flow is to change the MAS calibration. The MAC and other CAI kits do not do this, but the C&L kit does. Hope this helps. |
04-26-2002, 10:06 PM | #6 |
Registered Member
Join Date: Apr 2002
Location: So. Cal
Posts: 5
|
Get the Mac CAI.
|
04-30-2002, 02:26 AM | #7 |
Registered Member
Join Date: Mar 2002
Location: demotte, in
Posts: 25
|
i want to get that pro charger intercooled kit 345 hp in a v6 thats awsome
|
04-30-2002, 02:05 PM | #8 |
Registered Member
Join Date: Mar 2002
Location: Denver, CO
Posts: 30
|
In regards to superchargers, does anyone know any good online performance sites that sell procharger systems?
On that note, is there any real concern as to adverse affects of a supercharger? Prochargers.com seems to portray them as incredibly reliable upgrades that will not cause problems, they just might accentuate existing problems (misfiring and such) Any truth to all this?
__________________
2000 V6 Mustang H-pipe w/ two 3 chamber flowmasters C&L Cold Air Kit Steeda Strut Tower Brace Steeda Subframe Connectors w/crossbraces |
05-15-2002, 04:00 PM | #9 |
Registered Member
Join Date: Feb 2002
Posts: 9
|
you should try http://www.stungbymystangmotorsports.com/ john knows a lot about the 3.8 and he can get almost anything you want to buy
__________________
http://www.dcmustang00.cjb.net/ http://www.stungbymystangmotorsports.com/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A few '92 GT Performance Mods Questions | Fox Body | Windsor Power | 8 | 04-11-2003 06:19 AM |
New mods | 84gt347 | Racer's Club House | 4 | 09-23-2002 04:05 PM |
Brake mods ( and other first mods) for a 98 Vert | Chevyguy | Modular Madness | 11 | 09-19-2002 10:03 AM |
Making a fast Street Car = More mods? | MrClean | Windsor Power | 15 | 09-11-2001 04:40 PM |
Question..Minor mods that wont void warrenty on a 2000GT | Stac | Modular Madness | 5 | 07-14-2000 12:42 PM |