MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Small Ponies
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 05-19-2003, 08:10 PM   #1
andys88coupe
Registered Member
 
Join Date: May 2003
Location: Norfolk
Posts: 1
Default 88 2.3 overheating story !!

Hello everyone
hmmm where to start ..we've only had the car for about a year now and its mostly driven by my son to school and to baseball games ...
well last week my son was driving the car and it overheated in traffic, heater core big time leak.... so I chalked it up to a faulty heater core and bypassed it for a short term fix ....then few days later over heated again ... thought it was a loose hose clamp
but little did I know ....so i let it run in the drive way temp gauge works fine so I let it run till it got hot THE RADIATOR FAN never came on so I jumped it to the battery it came on sorta slow but it did come on and the jumper wires got pretty hot ,I looked under the dash found the fan relay (controller) Haynes book calls it a AC fan relay.... 2 leads were burnt up pretty bad, one to the fan and one to the fuse link at the starter relay ...got a new relay from Advance for 55 bucks then I saw the connector (pigtail) was burnt pretty bad too ... Next a trip to the Junkyard

..I found seven 2.3 stangs just like mine that had the same relay (controller) and 5 of them were burnt just like mine so I cut a good one out pigtail, relay and all so I butt spliced it in and let it run again ... still overheated but the fan came on for about 10 sec then poof it was off again for good
even burnt my j/y relay up i managed to repair the relay and bought a new fan !!!!!!! TADA it works great cycles on and off just like it should .. and the dag gone a/c even works now !!!!!fan prolly never worked since we bought the car ...fan must have been causing an over current burning the relays hence overheating and toasting my heater core .... whew sorry bout the lengthy post just thought I'd share my experience

thanks andy
andys88coupe is offline   Reply With Quote
Old 09-12-2003, 09:46 PM   #2
belewmoon
Registered Member
 
Join Date: Sep 2003
Posts: 5
Default

'90 2.3 auto.

Can anyone tell me where this fan relay (controller) is on my'90 2.3? Here are the things I have tried:
Had the fan go out on me so bought a new motor/fan & hooked it up. It won't come on no matter what.
1. Tried turning on the A/C. No fan. Fan should come on immediately when A/C is turned on right?
2. Let car idle, with no fan, until it got to the temp point that the fan (normally) comes on. Still no fan!
3. Checked fuse. O.k.
4. Check fuse link. Looks o.k. How can you tell when a fuse link is a bad?
5. Will run 12v direct to fan motor but it should be good as it's brand new.
6. What's next?
belewmoon is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cranks like its overheating Agent_4573 Windsor Power 2 10-29-2002 08:53 AM
The story of when I fought the girl that keyed my car! Kinda long, but it's worth it! Stang Obsession Blue Oval Lounge 9 10-14-2002 04:31 PM
Overheating rustang girl Classic Mustangs 42 08-03-2002 01:26 AM
Overheating Problems...Please Help!! Big Bopper Windsor Power 5 04-28-2001 01:46 AM
For those who wanted to hear a long story! MEC89 Blue Oval Lounge 2 02-09-2001 02:00 AM


All times are GMT -5. The time now is 08:03 AM.


SEARCH