Stupid question - Idler pulley

wdixon077 · 12-23-2003, 05:07 PM

Any hints for removing the idler pulley bolt (and which way do you turn it to remove it)? Either direction I try, it won't budge, and I can't find any documentation on this.

Thanks!!

84LX89GT · 12-27-2003, 07:12 PM

It will loosen counter-clockwise, so pull up from the driver's side.
You may have to get something with good leverage because sometimes those bolts will be in there pretty good.

12-29-2003, 05:21 PM

yeh what he said.
have you spent many hours reading all the tech books??

you are a wealth of info dude.

wdixon077 · 12-30-2003, 07:50 AM

Thanks. Had to put a torch to it... go figure.

84LX89GT · 12-31-2003, 04:05 AM

Quote:

Originally posted by digital3.3
yeh what he said.
have you spent many hours reading all the tech books?? you are a wealth of info dude.

Thanks

I try

12-31-2003, 04:24 PM

damn man, i just noticed that your from renton, i was down in that area about 6 months ago in the summer. its a pretty nice place dude.

12-23-2003, 05:07 PM	#1
wdixon077 Registered Member Join Date: Dec 2003 Posts: 2	Stupid question - Idler pulley Any hints for removing the idler pulley bolt (and which way do you turn it to remove it)? Either direction I try, it won't budge, and I can't find any documentation on this. Thanks!!

12-27-2003, 07:12 PM	#2
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	It will loosen counter-clockwise, so pull up from the driver's side. You may have to get something with good leverage because sometimes those bolts will be in there pretty good. __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A stupid question I hate asking about exhaust sound	jwboner	Windsor Power	4	08-05-2003 05:55 PM
FMU and Supercharger Pulley Question	NitroNixon	Windsor Power	3	05-14-2003 08:06 PM
underdrive pulley question?	stang_guy_95	Windsor Power	6	04-25-2003 07:38 PM
Really stupid question but I don't know	SCOTTLT79	Windsor Power	5	07-25-2002 12:27 PM
stupid pulley question	swtstang	Windsor Power	9	06-02-2001 08:18 PM

12-29-2003, 05:21 PM	#3
digital3.3 Guest Posts: n/a	yeh what he said. have you spent many hours reading all the tech books?? you are a wealth of info dude.

12-30-2003, 07:50 AM	#4
wdixon077 Registered Member Join Date: Dec 2003 Posts: 2	Thanks. Had to put a torch to it... go figure.

12-31-2003, 04:24 PM	#6
digital3.3 Guest Posts: n/a	damn man, i just noticed that your from renton, i was down in that area about 6 months ago in the summer. its a pretty nice place dude.