MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Small Ponies
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 03-08-2004, 08:23 PM   #1
mustardjohn
Registered Member
 
mustardjohn's Avatar
 
Join Date: Sep 2003
Location: Orange, TX
Posts: 360
Default eibach advice needed

I am about to order Eiback springs for a 2003 Mustang 3.8. I want to lower the car an moderately improve the handling. So I have chosen Eiback springs and the Mach 1 Tokico shocks and struts plus Ford rear Anti sway bar.

Here is the question. I am trying to choose between the Pro Kit or Sportline springs. Will i need new caster camber plate for the Sportline. I am told that if you lower much more than 1 to 1.5 inch new plates will be needed. The Sport line lowers about 2 in front 1.8 rear. What advice can anyone here give me? Would it be better to stay more conservatve with the Prokit or if Sport line what else will I need to do?

Also, should I buy new prothane spring isolaters or can I just have the springs installed as is. Will isolaters effect the amount of lowering?

Any advice appreciated.

Posted this in Corner Carvers but no takers on giving advice yet so I am trying this forum
__________________
2003 3.8 Mineral Gray, MAC CAI, K&N, Chin Spoiler
mustardjohn is offline   Reply With Quote
Old 03-09-2004, 01:34 AM   #2
84LX89GT
Mustangs
 
84LX89GT's Avatar
 
Join Date: Jul 2000
Posts: 1,938
Default

I'm not exactly sure the difference between the eibach springs, but i'd probably go for the moderate lowering kit and get the caster/camber plates so the alignment is correct. Getting the prothane isolators will not effect ride height, and they might be worth getting.
It's all about what look/ride you want, i'm not sure what the spring rates are but chances are the Sportline kit will be stiffer.
__________________
2005 Suzuki Hayabusa GSX1300-R

1980 Ford Thunderbird - 255 V8
ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain
hi-po Mack Truck hood emblem

1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc.

Sold 02/06/04
1989 Mustang GT ET: 13.304@102.29 mph (5-24-03)

Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)
84LX89GT is offline   Reply With Quote
Old 03-09-2004, 06:46 AM   #3
xxxBlakexxx
Registered Member
 
xxxBlakexxx's Avatar
 
Join Date: Sep 2003
Location: Mountaintop, PA
Posts: 634
Default

John:

Seems to me that you are doing what the experts suggest. A lot of guys simply lower the springs (which is fine), but if you really want to improve the ride/performance going with shocks/struts and sway bar is a great upgrade.

I don't know much about the V-6, so I am not sure if the suspension is similar or the same as the GT.

Do you get MM&FF? Check out either the most recent one or the month before. There is a pretty good article on suspension components and what they do. Lots of good explanations....may help.
__________________
"Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org

My Stang:
2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)
xxxBlakexxx is offline   Reply With Quote
Old 03-09-2004, 10:33 AM   #4
GodStang
College Stanger
 
GodStang's Avatar
 
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
Default

Lowering it to low will totally kill your ride. I would go with the Pro kit. The insulators are not a must but they do make the ride alittle better. The do effect the height but very slightly. I did not need Camber plates on my 94 V6 when I put on H&R SS lowering springs. They are not a must but would be a added bonus if you got them.
__________________
2003 Sonic Blue Cobra
GodStang is offline   Reply With Quote
Old 03-09-2004, 06:27 PM   #5
mustardjohn
Registered Member
 
mustardjohn's Avatar
 
Join Date: Sep 2003
Location: Orange, TX
Posts: 360
Default

Thanks for the advice. I will order tomorrow. The prothane isolators ar about 40-50 bucks so I wanted to ask. The ProKit lowers front and back by 1.5 in. The Sport Line drops it 2 in the front and 1.8 in the back. I thought the isolators might add back 1/4 to 1/2 inch is why I was considering the Sportline

Both springs are variable compression so they get stiffer as they compress. From what I read the Eibach's are some of the best but still priced at $209 a set which is a little more than Ford Racing but still reasonable.

The parts will be a little less than $500 delivered and a guy at my tire store says he will install for $200. Does that sound high? I didn't think so considering the effort.

Thanks for the reply. The Corner Carvers are still considering the question. Lots of views but no response. It must not be exciting enough for the real racers. From the pics over there I would say they are all lowered at least 2 inches.
__________________
2003 3.8 Mineral Gray, MAC CAI, K&N, Chin Spoiler
mustardjohn is offline   Reply With Quote
Old 03-10-2004, 10:19 AM   #6
GodStang
College Stanger
 
GodStang's Avatar
 
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
Default

$200 sounds like a pretty good deal. They are a pain in the but sometimes. As far as the insultors you should already have some on yours but crapy ones. The ride height that they talk about is with you still using your stock insulator. The aftermarket ones just hold up better and dampen better. Some people take there old ones off and use no insulators for even more drop and they say that they have no problems. I just think the ride would be horrible. Good luck with your choice.
__________________
2003 Sonic Blue Cobra
GodStang is offline   Reply With Quote
Old 08-19-2012, 08:12 PM   #7
4Isleeper
Registered Member
 
4Isleeper's Avatar
 
Join Date: Jul 2012
Location: Capitola, Ca
Posts: 4
Default Re: eibach advice needed

coil overs kits are the best. Griggs and Maximum Motorsports offer springs and shocks combination that will suit your driving habits. Other manufactures sell products to make money. Check American Iron racing. I have griggs and can adjust my ride height for street or track.
4Isleeper is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Eibach advice mustardjohn Corner Carvers Delight 5 03-17-2004 10:03 PM
Eibach spring install , needed accessories?? skiwesser Windsor Power 1 07-27-2003 10:00 PM
Advice needed for a clutch replacement in a 2000 GT GLDNPNY Modular Madness 2 03-06-2003 10:07 AM
Advice needed for a futur Mustang owner Steph Blue Oval Lounge 8 10-21-2001 11:21 PM
Veterans Help Needed!!! What do I do Next??? Really in need of Advice!!! Piston Windsor Power 4 03-06-2001 10:56 AM


All times are GMT -5. The time now is 11:24 AM.


SEARCH