MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Small Ponies
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-15-2003, 08:13 PM   #1
DOBOY1988
Registered Member
 
Join Date: Feb 2003
Location: Bolingbrook, IL
Posts: 1
Unhappy Engine Over Heat At Idle

My Pony has 2.3L, is a 4 banger, 1988 LX Mustang Conv't. Got it from a neighbor who cheated me badly (the odometer was set back 100K, actually 157K). After some major repairs, I managed to restore the car for fun drives in summer.

It is a fuel efficient car (21 - 25 mpg) , compared to its bigger-engined brother 5.0L. However, I find it bothering recently that if I let the engine idle running, the temperature gauge would rise and rise and eventually kick in the cooling fan. Even in cold Chicago winter weather here; unbelieveable!

I have so far, replaced the fan relay module, which was burnt out outside the Cominski Park last summer due to overheated wiring, flushed the coolant, replaced the water pump, and the thermostat. But the symptom seemed to reduce just a bit. Is it true that this 2.3L engine was designed to get hot at Idle? The cooling fan kicks in often in summer time if I don't use the air conditioning, or the heater when I got caught in still traffic.

This pony runs fine when it is moving, just that it doesn't like to sit in traffic, I can't figure out why.... One thing I suspect though, I have done some body work (3) years ago, and may have painted the radiator fins in the front, I wonder if I straight out the fins and remove the painted stains, could I get a better result?

If anyone have ever had experience like this, I would like to learn a few tricks to correct this problem.

Many thanks in advance!

DOBOY1988
DOBOY1988 is offline   Reply With Quote
Old 02-15-2003, 09:09 PM   #2
GodStang
College Stanger
 
GodStang's Avatar
 
Join Date: May 1999
Location: Aiken,south carolina, usa
Posts: 1,097
Default

If you are losing water it could be a blow head gasket. If he lied to you about the odometer then you can get him for that. I do not think 25 mpg for that car is good. people for v8s get that.
__________________
2003 Sonic Blue Cobra
GodStang is offline   Reply With Quote
Old 02-16-2003, 11:07 PM   #3
BLACK85GT
Registered Member
 
BLACK85GT's Avatar
 
Join Date: May 2002
Location: Tampa,FLORIDA
Posts: 340
Default

Its the radiator. Get a new one. If its the original with that many miles, its probably clogged. 25mpg is about right for a convertable that is 15 years old with that many miles.
__________________
5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear.
Production # 9,377
BLACK85GT is offline   Reply With Quote
Old 02-19-2003, 10:54 PM   #4
OnMy3rdStang
Registered Member
 
OnMy3rdStang's Avatar
 
Join Date: Nov 2001
Location: St. Louis, MO
Posts: 644
Default

I had a similar problem but my mustang had a new radiator put in about 3 years ago and everything seems normal but from time to time it overheats. Dont know why
__________________
Danica Patrick is my homegirl
OnMy3rdStang is offline   Reply With Quote
Old 02-24-2003, 06:52 AM   #5
Miss Mischief
Registered Member
 
Miss Mischief's Avatar
 
Join Date: Feb 2003
Location: Still Ugly as ever
Posts: 111
Default Re: Engine Over Heat At Idle

Quote:
Originally posted by DOBOY1988
My Pony has 2.3L, is a 4 banger, 1988 LX Mustang Conv't. Got it from a neighbor who cheated me badly (the odometer was set back 100K, actually 157K). After some major repairs, I managed to restore the car for fun drives in summer.

If anyone have ever had experience like this, I would like to learn a few tricks to correct this problem.

Many thanks in advance!

DOBOY1988
Add That Years 5.0 Liter Radiator It is thicker not wider and Holds More coolent. If you are Lucky and have Electric Cooling Fans Great Get the Dual fan Kit for the 5.0 allot of your heating problems will be solved. Used 5.0 Radiator copper $40 Twin Fans $75+ Depends where you buy it
__________________
Miss Mischief

RHC#153 Proud to carry the Card

2000 V-6 5 speed Frame Braces [Steeda] [Wanna be Cobra] 17" Rims with Kuhmo 245's 5 Spoke Gunmetal finish [Power Dyne] Blower Unpolished 6 psi {Mods to Come} [Steeda] Springs slightly lower then stock [Steeda] Anti sway bars front and rear.

1999 Jeep Cherokee Big six 5 speed Infinty Bose steroe Lots of Creatures Comforts [Mods] Brush/ Push bar Full length Welded and Bolted , Tow Hook Front and Rear 30" Goodyear AT's .
Miss Mischief is offline   Reply With Quote
Old 03-09-2003, 04:40 AM   #6
OnMy3rdStang
Registered Member
 
OnMy3rdStang's Avatar
 
Join Date: Nov 2001
Location: St. Louis, MO
Posts: 644
Default

Nope all Rads from 87-93 are practically the same with exception to the 93 Cobra R model which had a degas bottle on it.

Now there was an HD radiator available but. The 2.3's use the same radiator stock as a 5.0 does....
__________________
Danica Patrick is my homegirl
OnMy3rdStang is offline   Reply With Quote
Old 03-10-2003, 12:16 AM   #7
84LX89GT
Mustangs
 
84LX89GT's Avatar
 
Join Date: Jul 2000
Posts: 1,938
Default

Quote:
Originally posted by OnMy3rdStang
Nope all Rads from 87-93 are practically the same with exception to the 93 Cobra R model which had a degas bottle on it.

Now there was an HD radiator available but. The 2.3's use the same radiator stock as a 5.0 does....
2.3L mustangs have a one core radiator, whereas the 5.0L's came with 2 core radiators. Ford Motorsport offers a 3 core radiator for Fox Body cars, which is what i bought for my stang. My '91 2.3L mustang i had, had a tiny radiator and it literally has 1/2 the cooling ability of a 2 core because there's 1/2 the surface area for heat transfer. Also with painted fins, that seriously insulates heat transfer from the radiator to the air, which is probably the culprit in this case.
If you clean off or buy a new one core radiator for your car your car should be able to get rid of all that heat, a 2 or 3 core would cool off your engine alot faster as well, but it's pretty much overkill because 2.3's when working properly don't put out alot of heat. If i were you i would probably get a brand new radiator unless you're confident you can get all the chemicals off your radiator and the condition of the inside of the radiator is that it isn't rusted or anything like that. The fact that your cooling fan is constantly kicking on and even overheating the wiring shows that your car isn't able to shed enough heat from the radiator, especially if using the heater (heater core - mini radiator) helps cool it down.
Keep us posted on what you find.
__________________
2005 Suzuki Hayabusa GSX1300-R

1980 Ford Thunderbird - 255 V8
ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain
hi-po Mack Truck hood emblem

1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc.

Sold 02/06/04
1989 Mustang GT ET: 13.304@102.29 mph (5-24-03)

Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)
84LX89GT is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cobra R Engine 5.4L V8 SkammyManX Modular Madness 5 04-28-2005 11:25 AM
Vacuum reading at idle? exgmguy Windsor Power 20 09-27-2002 06:22 AM
Strange noise from my 2000 GT engine RoadRunnerGT Modular Madness 7 11-06-2001 05:48 PM
Popping sound @ Idle when engine cold, any ideas?? jetuomi Windsor Power 10 05-31-2001 12:40 PM
Need help with idle oldman Windsor Power 8 05-30-2001 12:50 AM


All times are GMT -5. The time now is 05:00 PM.


SEARCH