Inline Six stuff

Stefan · 07-25-2000, 09:42 AM

OK, before everyone starts laughing that I haven't ripped out my 200 for a 289

.... what have you guys with 200's done to your engines? Let me preface this with "I am not trying to make 200 or 300 hp from this engine." I just want it to run as good as it can. Mine is a strong rebuilt 200 that runs perfect compression and burns no oil. It is perfect for cruising and gets decent gas mileage. Stock 120hp isn't gonna throw your head back but it's a hell of a lot of fun to drive. Has anybody done a 2v upgrade? Any suggestions on giving it a tad more umph? Remember, I am not trying to run with the big boys, but just trying to have fun with a six. All your input would be greatly appreciated as the 6 cyl. topics don't surface too often (I would have posted this in the Small Ponies section but that seems to be all SVO and late model 4 bangers and 6 bangers. Thanks in advance for anyone that wants to jump in. Help!

Stefan

------------------
66 Standard coupe
200 inline 6 - Pertronix ignition, Flamethrower Coil, K&N, Clifford Perf. 6 into 2 headers, Holley carb, three row radiator

96 GT Convertible
Splitfire plugs (they were free - don't laugh).
K&N, removed air silencer (more to come)
Next up: 3:73's and side exhaust
www.mustangworks.com/cgi-bin/moi-display.cgi?258

driggins · 07-25-2000, 02:07 PM

doing the same here but I have not started. Looking at clifford exhaust/ and Holly projection carb

check out http://www.inliners.org

------------------
66' coupe
http://www.my66stang.stangnet.com

Stefan · 07-26-2000, 09:23 AM

Thanks for the link. Educate me here. What exactly is the Holley projection carb? I'm not familiar with it. The link to your website wouldn't work so if you explain it there I can't access it. Surely there's a few more 6'ers out there. What are you guys doing to your engines?

As always, thanks!

Stefan

driggins · 07-26-2000, 11:47 AM

My web page is http://www.donald.riggins.com

holley projection is a fule inducted carb. The kit includes carb computer and inline electronic fule pump. P/N = 501-12
see @ http://www.holley.com/HiOctn/ProdLin...SFI/FMSFI.html

This is for the Jeep and a spacer would have to me hand made to get it to work. As far as I know no one has tried this.

------------------
66' coupe
200 inline 6

07-25-2000, 09:42 AM	#1
Stefan Registered Member Join Date: Dec 1998 Location: Manhattan, KS 66502 Posts: 599	Inline Six stuff OK, before everyone starts laughing that I haven't ripped out my 200 for a 289 .... what have you guys with 200's done to your engines? Let me preface this with "I am not trying to make 200 or 300 hp from this engine." I just want it to run as good as it can. Mine is a strong rebuilt 200 that runs perfect compression and burns no oil. It is perfect for cruising and gets decent gas mileage. Stock 120hp isn't gonna throw your head back but it's a hell of a lot of fun to drive. Has anybody done a 2v upgrade? Any suggestions on giving it a tad more umph? Remember, I am not trying to run with the big boys, but just trying to have fun with a six. All your input would be greatly appreciated as the 6 cyl. topics don't surface too often (I would have posted this in the Small Ponies section but that seems to be all SVO and late model 4 bangers and 6 bangers. Thanks in advance for anyone that wants to jump in. Help! Stefan ------------------ 66 Standard coupe 200 inline 6 - Pertronix ignition, Flamethrower Coil, K&N, Clifford Perf. 6 into 2 headers, Holley carb, three row radiator 96 GT Convertible Splitfire plugs (they were free - don't laugh). K&N, removed air silencer (more to come) Next up: 3:73's and side exhaust www.mustangworks.com/cgi-bin/moi-display.cgi?258

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Needing info on Goodyear Tubing that acts like the Powerflex stuff...	11Sec_Lx	Windsor Power	1	01-05-2003 03:48 PM
Speed Secret # 4	jim_howard_pdx	Windsor Power	13	11-10-2002 03:42 PM
inline 6 hp	fordkid68	Small Ponies	0	03-13-2002 03:00 AM
Suspension stuff...	Skyman	Blue Oval Lounge	3	01-12-2001 07:50 AM
Classic stuff from ClubSI....	Hammer	Blue Oval Lounge	2	01-11-2001 10:32 PM

07-25-2000, 02:07 PM	#2
driggins Registered Member Join Date: Apr 2000 Location: Richmond, VA Posts: 33	doing the same here but I have not started. Looking at clifford exhaust/ and Holly projection carb check out http://www.inliners.org ------------------ 66' coupe http://www.my66stang.stangnet.com

07-26-2000, 09:23 AM	#3
Stefan Registered Member Join Date: Dec 1998 Location: Manhattan, KS 66502 Posts: 599	Thanks for the link. Educate me here. What exactly is the Holley projection carb? I'm not familiar with it. The link to your website wouldn't work so if you explain it there I can't access it. Surely there's a few more 6'ers out there. What are you guys doing to your engines? As always, thanks! Stefan

07-26-2000, 11:47 AM	#4
driggins Registered Member Join Date: Apr 2000 Location: Richmond, VA Posts: 33	My web page is http://www.donald.riggins.com holley projection is a fule inducted carb. The kit includes carb computer and inline electronic fule pump. P/N = 501-12 see @ http://www.holley.com/HiOctn/ProdLin...SFI/FMSFI.html This is for the Jeep and a spacer would have to me hand made to get it to work. As far as I know no one has tried this. ------------------ 66' coupe 200 inline 6