suspension for a 95

hwy1strat · 08-28-2005, 09:19 PM

I have a 95 mustang with a 3.8 liter and i want to put new suspension on it but i dont know what kind of suspension or what i need. any recommendations or help would be nice. Thank you.

84LX89GT · 09-08-2005, 12:47 AM

For fun, sporty driving replacing the shocks and struts goes ALONG ways toward improving how it handles (good stock replacement, KONI, BILSTEIN). Installing a rear sway bar will make the biggest difference, and one from a GT will bolt right in. Also the second biggest improvement i've noticed is replacing the rear control arms with tubular control arms with polyeurethane bushings (ends the back end "wag" from the stock rubber bushings). Installing mustang GT springs or getting 1 1/2" lowering springs will improve road feel, ride and make the car alot sportier as well. You can buy these parts at a reputable speed shop site like www.summitracing.com or www.jegs.com, www.stangsuspension.

mysteed · 09-14-2005, 01:12 PM

It depends on the type of driving you plan on doing. You have different suspension setups for daily drivers, 1/4mile only stangs, and autocross stangs.

08-28-2005, 09:19 PM	#1 (permalink)
hwy1strat Registered Member Join Date: Aug 2005 Posts: 1	suspension for a 95 I have a 95 mustang with a 3.8 liter and i want to put new suspension on it but i dont know what kind of suspension or what i need. any recommendations or help would be nice. Thank you.

09-08-2005, 12:47 AM	#2 (permalink)
84LX89GT Money Waster Join Date: Jul 2000 Location: Tucson, AZ Posts: 1,933	Re: suspension for a 95 For fun, sporty driving replacing the shocks and struts goes ALONG ways toward improving how it handles (good stock replacement, KONI, BILSTEIN). Installing a rear sway bar will make the biggest difference, and one from a GT will bolt right in. Also the second biggest improvement i've noticed is replacing the rear control arms with tubular control arms with polyeurethane bushings (ends the back end "wag" from the stock rubber bushings). Installing mustang GT springs or getting 1 1/2" lowering springs will improve road feel, ride and make the car alot sportier as well. You can buy these parts at a reputable speed shop site like www.summitracing.com or www.jegs.com, www.stangsuspension. __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

09-14-2005, 01:12 PM	#3 (permalink)
mysteed Registered Member Join Date: Nov 2004 Location: Kennesaw, GA Posts: 16	Re: suspension for a 95 It depends on the type of driving you plan on doing. You have different suspension setups for daily drivers, 1/4mile only stangs, and autocross stangs. __________________ Sponsored by Super Six Motorsports My Mustang Pictures

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1991 LX Suspension MODS	Chuck Boone	Windsor Power	2	02-24-2003 08:25 AM
engine, suspension, & paint	moonblue66	Classic Mustangs	8	08-22-2001 02:45 AM
Mustang suspension	Skankin	Corner Carvers Delight	1	08-17-2001 06:10 PM
SUSPENSION, SUSPENSION, SUSPENSION . PLEASE HELP!	BowTie Eater 5 Liter	Windsor Power	11	02-03-2001 07:18 AM
Preferred suspension?	Ellis	Corner Carvers Delight	4	08-24-2000 04:57 AM

Sponsored Links