v6 supercharger

rCoolOne · 05-05-2004, 08:24 PM

I have a 2000 v6 mustang with 4.10's I plan on eventually puting off road true dual exhaust, but right now i want to invest in puting a supercharger on it. I know alot about 4.6 v8 superchargers but i dont know the first thing about v6 superchargers, does anybody have any suggestions on what kind of supercharger or how many pounds of boost to use or anything would be helpful.

84LX89GT · 05-08-2004, 11:03 PM

The same rules apply to 4.6's as 3.8L's. If you go up to 9lbs on the street you will probably be fine, i'd personally opt for a roots style supercharger (eaton), so a kit from Kenne Bell (i believe they make kits for 3.8's but i'm not sure) would be ideal since they make boost instantly off idle, but still a vortech is always a good choice and probably the most popular for V6's. The 3.8's have always had head sealing issues, but i believe in the late 90's they reduce the size of the coolant passages around the cylinders for a more rigid block (what they did in the super coupe 3.8's) and so it's less likely you'll blow a head gasket.

mustardjohn · 05-09-2004, 06:23 PM

Good sites for superchargers. Lots of info here. Jim Roal will answer an e-mail if you send him one with some good questions.

http://forums.mustangworks.com/showt...threadid=40200

05-05-2004, 08:24 PM	#1
rCoolOne Registered Member Join Date: Apr 2004 Posts: 2	v6 supercharger I have a 2000 v6 mustang with 4.10's I plan on eventually puting off road true dual exhaust, but right now i want to invest in puting a supercharger on it. I know alot about 4.6 v8 superchargers but i dont know the first thing about v6 superchargers, does anybody have any suggestions on what kind of supercharger or how many pounds of boost to use or anything would be helpful.

05-08-2004, 11:03 PM	#2
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	The same rules apply to 4.6's as 3.8L's. If you go up to 9lbs on the street you will probably be fine, i'd personally opt for a roots style supercharger (eaton), so a kit from Kenne Bell (i believe they make kits for 3.8's but i'm not sure) would be ideal since they make boost instantly off idle, but still a vortech is always a good choice and probably the most popular for V6's. The 3.8's have always had head sealing issues, but i believe in the late 90's they reduce the size of the coolant passages around the cylinders for a more rigid block (what they did in the super coupe 3.8's) and so it's less likely you'll blow a head gasket. __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

05-09-2004, 06:23 PM	#3
mustardjohn Registered Member Join Date: Sep 2003 Location: Orange, TX Posts: 360	Good sites for superchargers. Lots of info here. Jim Roal will answer an e-mail if you send him one with some good questions. http://forums.mustangworks.com/showt...threadid=40200 __________________ 2003 3.8 Mineral Gray, MAC CAI, K&N, Chin Spoiler

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roots supercharger (like Kenne Bell)....who offers them?	84LX89GT	Windsor Power	10	08-10-2006 06:23 PM
96 Cobra Supercharger questions	mosibobo	Modular Madness	8	08-09-2006 01:50 PM
FMU and Supercharger Pulley Question	NitroNixon	Windsor Power	3	05-14-2003 08:06 PM
Want Supercharger But have 9.8:1 comp. is this trouble?	NewAge 5.0	Windsor Power	4	12-18-2002 08:50 AM
Paxton Supercharger Guys LOOK	89 Cobra LX	Windsor Power	1	06-11-2002 03:10 PM