Help me save some money :D
 

I'm looking to buy an Accufab 70mm TB and EGR spacer. I found them at Holcomb for $269.00 for both but I know I've seen them cheaper. Anyone know of any lower prices? It would sure help me out.

Also, anyone have any comments on the Accufab TB's - good or bad? Do they come with a TPS?

Thanks a lot.

------------------
Gunning for 12's!
http://www.indianastangers.com/2Fast..._brd_logo2.gif
Buy your parts here
ICQ# 42269241

Hey Kev, hows things going? Let me know if you find them cheaper as I am getting a 75mm soon, the cheapest I have found has been $269 and they don't come with a TPS or Idle Bypass, but are very stunning, shiny and nice quality stuff, I also like the Holley's http://www.mustangworks.com/msgboard/smile.gif



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree

I considered the Holley TB, but for the extra money I didn't think it would be worth it. I do like the look of the Holley TB's better, especially the EGR spacer. I was going to order from JD's Performance because they have them for $255, but I went ahead and ordered from Race Parts 2 to see how they were to deal with, plus my wife wouldn't let me use the credit card LOL. It was $269 from them for the TB and EGR spacer, but they had C.O.D. which JD's didn't. So actually I got reamed, but I don't think I'll be complaining too much when I get the TB. I've seen them on other cars at the track and they are beautiful pieces.

After I got to work today I was thinking though that I could have just made an EGR spacer out of aircraft aluminum and saved a few bucks. We have some perfect sized chunks of aluminum that were supposed to be made into parts but went through the fire so the customer decided to send more material.

------------------
Gunning for 12's!
http://www.indianastangers.com/2Fast..._brd_logo2.gif
Buy your parts here
ICQ# 42269241

Well, I found out how they were to deal with. I ordered a 70mm TB and EGR spacer and got this...
http://www.indianastangers.com/2FastLX/images/90mm2.jpg

Not a TB and EGR spacer. Just the TB. And does anyone wanna guess what size it is???
Hint: It's definately not a 70mm and it would probably kill my low end so bad my car wouldn't even begin to roll from a 2500rpm launch http://www.mustangworks.com/msgboard/tongue.gif

But I do have one thing to say that is a plus... These Accufab TB's are KICK@SS! It's polished to a mirror finsh. No exaggeration at all.

------------------
Gunning for 12's!
http://www.indianastangers.com/2Fast..._brd_logo2.gif
Buy your parts here
ICQ# 42269241

[This message has been edited by 2FastLX (edited 09-14-2001).]

is it a 90mm?

------------------
88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft

You nailed it =)

[This message has been edited by 2FastLX (edited 09-15-2001).]

I'd say thats a little big, huh? Hope the return goes well. I am trading my 65mm Accufab for my buddies 75mm he has never used.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree