2.3 to 5.0 swap
 

im starting on doing it to a 93 lx hatch that i just bought and wondering if anybody here has done it or knows where i can get some info on doing one i have the brakes and rearend motor trans gauges and pedals just need to know if the 87 motor harness i have will work with the 4 cyl main harness in the car

Re: 2.3 to 5.0 swap
 

Thats a good question, but you probaly need the a9l ecu, and the harness after that, preferably a maf ecu, you can probaly get one out of a junkyard.
Cuz you'll need all the sensor, and injector plugs ect...but i know a google search would help, or im certain someone here can give more help. good luck

Re: 2.3 to 5.0 swap
 

http://www.jason.fletcher.net/tech/e...b/efi-carb.htm
check out this site

Re: 2.3 to 5.0 swap
 

Do a search on this site for this info. This has been asked at least a dozen times and I remember some folks doing some pretty detailed writeups on it, along with part lists.

Re: 2.3 to 5.0 swap
 

That harness should work. Do you have the speed density computer as well? Is your motor complete with sensors? fuel pump is the same, but lines are different. Also, there is an issue with one of the rear brake lines and exhaust clearance with full exhaust, if I remember right. A9L, A9P, or A9M computers will work if you get a complete mass air harness or the conversion harness to go with what you have, it doesn't matter what trans you have, it will work, I have an A9P out of a 90 gt AOD in my 93 Cobra, which of course is a 5-speed and it works great. Thats all off the top of my head. Anything else, let me know.:o

Re: 2.3 to 5.0 swap
 

You're better off with a donor car so you can get everything you need. Wiring, computer parts, suspension, mounts, etc.

Re: 2.3 to 5.0 swap
 

i would post all my pics on here but it would take awhile so here is my thread on stangnet

have fun comment question advice whatever

http://forums.stangnet.com/showthread.php?t=681833

iv done a lil more than this ill probaly post pics on here tomorrow