|
What's your best guess???
O.K. guys and gals, I'm almost there as my motor is just about done. What's lacking? My oil pan. Canton has just about got it right (third time is a charm....I hope).
Anyway, with any luck this thing will be hitting the dyno Monday the 22nd. So, how much H.P. is this thing going to make? Read the scoop and then take your best guess! 417 c.i Windsor, SVO Yates heads: flowing 343/265 Compression 13.5:1 CAM: Solid roller- Duration:316int ,322exh. 278/282 at .50 Lift: Intake- 688 Exhaust- 672 Intake: SVO, ported Carb: Braswell Headers KOOK'S 2 1/4 with 4 inch collectors Rockers Jesel This will be done on an engine dyno so take a guess on the H.P. off of the motor alone. ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car |
613hp @ 6600rpm
------------------ Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac, 12.38 @ 111.28 1.80 60ft 28X10 street tires 12.17 @ 112 26 X 10 slicks http://www.mustangworks.com/mustangs...g347-slot3.jpg |
with out giggle gas, I'd say about 450 or so. With gas around 600, give or take. The more the better though. Good luck and I hope it breaks the dyno!!
|
I'd be really suprised if the engine number wasn't well over 500 N/A. I'll guess 525hp N/A, I'm not sure what kind of N20 shot you're running, so I'll leave that blank.
|
Providing adequate fuel and timing getting worked out right....
633@6800rpm Anything for the closet person? Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft. On its way: Paxton Sn-89 with dyno tuning and long tubes. Just added: B&M Ripper, Weldin Subframes, & Turn downs! 13.2@106mph |
New Guess 598@6800rpm
Skyler |
|
I'll vote for an even 600 hp.
|
wow, i think you all are a little high. Ill go with 475 N/A.
------------------ 1993 GT/AOD '93 Mustang GT |
Skyman
I figured someone would ask that sooner or later!! How about a Mustang Works t-shirt to the closest guess without going over. Also, there will be NO nitrous pulls on the dyno. Good luck! ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car |
One dollar, one dollar...oh sorry that was The Price is Right. I'm gonna go extreme here, I would say 660hp.
[This message has been edited by 88GT5.013.02 (edited 01-18-2001).] |
I'll say 575.
|
|
576@5800
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. |
Given 13.5:1 comp, that size cam, and 417 cu. in. of big, bad, as$kickin' Ford Motor...I am going to guess 529 HP.
Good luck, Kevin! E ------------------ 1991 5.0 LX Coupe -37,800 miles 13.17 @ 106.14 mph w/ 2.138 60' Pro-Charger D-1SC on the way!!! |
I don't have an gram of experience or intelligence on this guess, but I want the T-shirt so I'll say 536HP @6000 RPM
|
600
Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded WANT XENON HEADLIGHTS AND WHITE FACE GAUGES? Visit my site: http://www.stangpower.com |
563.416623444 hp
------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback http://www.mustangworks.com/mustangs...1245-slot2.jpg |
I think the numbers are way off my self. That motor is alot like the combo they run in Winston Cup cause he's running Robert Yates heads. So those motors crank out about 700-800 Hp plus they have some rules that he probably doesn't. He also has more cubes, so I'm guessing 725hp@7500. Good luck man!
------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html [This message has been edited by 93CobraR (edited 01-18-2001).] |
My bet is 495HP@6250rpm or 354KW/6250rpm.
GIMMI DA T-SHIRT! ------------------ Lizard King - 00GT http://www.mustangworks.com/mustangs...1393-slot3.jpg >> 13.698 @ 101.2MPH - BONE STOCK, yes BONE(even air filter) stock. "I can do anything, I'm the Lizard King." - The Doors |
| All times are GMT -5. The time now is 10:55 PM. |