94 cobra intake installation!!!!!!!!!!
 

Hey, I just purchased a cobra intake edelbrock 65 throttle body and 75 MAF for the 94-95 model. My question is, How hard is it to do the installation. I have heard that its hard because of the injectors. I am being charged 250-450$ for the job. Is it worth that much. Thanks.

I have installed/reinstalled mine many times. The price seems high. Removing and installing the injectors is easy.

The last time I did mine, it took about 2.5 hours total and that was working slowly. It was hot outside!

------------------
95 GT, GT40 Aluminum Heads, Intake u/l, 9# Powerdyne SC, 65 mm FMS TB, 70 mm FMS MAS, 30 lb injectors, E303 cam, Hooker Super Comp equal shorty headers, H pipe, Flows, Nitto DR, MSD BTM, Adjustable FP reg, 255 fuel pump, Autometer gauge pod with Electric FP guage and Boost guage, a few other odds and ends

Very easy to do yourself... I had never done one before I did my cobra intake that I have now and it was really straight forward... If in doubt, get a chiltons book for reference... I've had mine off and on a few times as well.. Good luck!

------------------
Joe!
1988 GT, 167,000 miles!!! 13.71@105mph Check out my listing! Click here! Or my website:
www.joe4speed.com
1999 Ninja ZX-6R 10.32@135mph!

It's easy work, it just takes some time.

VERY easy!!! about 3 hours if it is your first time... the injectors are a walk in the park copared to every thing else...