Newbie
 

New here. Just wanted to say "hi". http://www.mustangworks.com/msgboard/biggrin.gif

------------------
302 shortblock, X303 heads, E303 cam, SVO 1.6 roller rockers, GT40 upper/lower w/ 1" spacer, BBK 70mm throttle body & EGR, 30# inj., A/C elim., Smog Elim., Pro-M 75mm, 9lb Paxton SN93 Charger, AFM Power Pipe, MSD 6AL w/ BTM, 190lph in tank, T-Rex inline, Paxton regulator, Ron Davis 3 core aluminum radiator, BBK chrome shorties, MAC H-Pipe, MAC Dumps, GER C4 w/ Trans Specialties Custom built 10 XHD HS converter, B&M Ripper Shifter, Southside upper/lower control arms, Kenny Brown Sub's, S&W 8-poi

Alicia:

Hi, and welcome!
Your mod list is impressive. Hope to see you posting more.



------------------
Mr. 5.0
Messageboard Administrator

Welcome aboard!

Are you sure you don't mean GT-40X heads and E-303 cam, I've never heard of X303 heads. Could be wrong, none of the X parts are really common mods, they can work very well though.

Regardless, certainly whoop up on my stock 87GT.

hey..jersey eh..you go to e-town alot..i went on saterday..what kinda car is all that stuff in..you got any times yet???by the look of all that motorsport and things like the ron davis radiator it looks like you make alot of trips to DOWNS ford..how close are you to it

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

Welcome Alicia... you have picked the best Mustang board with friendly and knowledgeable people! Enjoy it and have fun! http://www.mustangworks.com/msgboard/smile.gif

------------------
Joe!
1988 GT, 167,000 miles!!! 13.71@105mph Check out my listing! Click here! Or my website:
www.joe4speed.com
1999 Ninja ZX-6R 10.32@135mph!

Holy Modfest Alicia!

Welcome on, this place is great. enjoy

Welcome to the jungle!

------------------
Lizard King, Bone Stock; 13.69 at 101MPH
• http://members.mustangworks.com/liza...meburnout2.mpg
•http://members.mustangworks.com/liza...stangVSLS1.mpg
• <A HREF="http://members.mustangworks.com/lizardking/quartermile.mpg" TARGET=_blank>http://members.mustangworks.com/lizardking/q

Hey Alicia.

Good to have you here. I don't know if you realize it or not, but you have become a part of an awesome, evergrowing Mustang community here at Mustang Works. I haven't yet seen a site that compares to it.
Later.

-------------------------------
'79 Mustang Coup
4" Cowl
Weld wheels (15x6;15x8)
Stock 5.8L
C4 w/ shift kit
1.5" MAC full length headers
Holley 750 CFM
Edelbrock intake
2.5" Off road H-pipe, 2-chamber Flowmasters
8.8" Rear end w/ 3.55 gears (Now that's more like it!!) http://www.mustangworks.com/msgboard/biggrin.gif
Front: 225/60/15 Rear: 255/60/15 Eagle GT II
14 x 4” K&N air filter (getting the Xtreme setup soon) http://www.mustangworks.com/msgboard/cool.gif

"Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

LX XLR8R: I have never been to e-town. We just bought a trailer so who know we may go at some point. We have a 92GT mustang. The best time so far was 11.608 @114.98 w/1.619 60'(last year). I can't drive the car anymore because my husband welded the seat in. http://www.mustangworks.com/msgboard/frown.gif I can't reach the pedals. LOL We have been to DOWNS so many time. We are about 1 1/2 - 2 hours away from there.

Unit 5302: My sig is correct. http://www.mustangworks.com/msgboard/biggrin.gif

------------------
302 shortblock, X303 heads, E303 cam, SVO 1.6 roller rockers, GT40 upper/lower w/ 1" spacer, BBK 70mm throttle body & EGR, 30# inj., A/C elim., Smog Elim., Pro-M 75mm, 9lb Paxton SN93 Charger, AFM Power Pipe, MSD 6AL w/ BTM, 190lph in tank, T-Rex inline, Paxton regulator, Ron Davis 3 core aluminum radiator, BBK chrome shorties, MAC H-Pipe, MAC Dumps, GER C4 w/ Trans Specialties Custom built 10 XHD HS converter, B&M Ripper Shifter, Southside upper/lower control arms, Kenny Brown Sub's, S&W 8-poi

Unit the X heads are actually called X302 but are abbreviated at GT40X. The Gt40Y's are really Y302's. As the very old J's are J302's. Thats what she means. The 303 is the cam specs.

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, 2 1/4" exhaust, and 4.10's.
332RWHP@5500
351RWTQ@3750
Runs on 87 Octane!

WWWAAAAAAAAAAAAAAAAAAAAAAASSSSSSSSSSSSSSSSSSSSSSSS SSUUUUUUUUUUUUUUUUUUUUUUUUUUUPPPPPPPPPPPPPPPPPPPP! !!!!!!!!!!!!!!????????? Light Em Up!! http://www.mustangworks.com/msgboard/smile.gif

Like I was just telling Jackie, you have found the best Mustang site on the web!!! And we also have an awsome female section run by the very talented (and beautiful I might add) Nicole Douglas. Hope you hang around a while. http://www.mustangworks.com/msgboard/cool.gif

------------------
92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

See, even egomaster's like myself can acknowledge learning something here everday!

http://www.mustangworks.com/msgboard/biggrin.gif