Cobra R's
 

I just cant wait. I am ordering my 17in Chrome Cobra R wheels this morning. I will be so happy to get rid of these old turbines!! I just had to share my excitment.

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors

Hey, while you're at it, order a set of 17x9's for me. But I'll be nice and let you pay for'em! heh heh http://www.mustangworks.com/msgboard/tongue.gif

[This message has been edited by bigwhitecobra (edited 05-07-2001).]

Man, I want those wheels too! I am still running on turbines too and looks like I will be for quite a while considering money http://www.mustangworks.com/msgboard/frown.gif. At least you got a set though!

Ended up costing 250 each for the wheels, 550 for the tires and 16 for the lug nuts..so around 1700 for everything with balance and lifetime warranty...They will be in Wednesday! But i have my car torn apart so prob wont be able to get it out for a couple more weeks. http://www.mustangworks.com/msgboard/smile.gif

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors

Hey Smokedawg send your rims to me I'll run them for you while your car is down. You know make sure they are round and all that good stuff. http://www.mustangworks.com/msgboard/biggrin.gif. Plus I wouldn't mind blinging it for a while.lol



------------------
2000 Mustang GT

ok..white00GT i got them in the mail u just wait for them http://www.mustangworks.com/msgboard/smile.gif

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors

yea, I'm gonna get a set for my car. Those will give me at least 50 HP and let me put like 9 G's on the skid pad.

he he hee http://www.mustangworks.com/msgboard/biggrin.gif

------------------
1990 Dodge Dynasty with 175,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"
http://cwm.ragesofsanity.com/s/net2/burnout.gif

P.S. watch out cobra owners it's a freak

50HP might be a little much but I would say every bit of 35HP http://www.mustangworks.com/msgboard/smile.gif

HEHEHE I'm waiting http://www.mustangworks.com/msgboard/cool.gif..lol..just think I can cruze Smokedawg's rims in Myrtle Beach, and get all the bangen girls http://www.mustangworks.com/msgboard/eek.gif..ahahahaah..yeahhh http://www.mustangworks.com/msgboard/biggrin.gif


------------------
2000 Mustang GT

Well, I thought I had done good to wait this long for the wheels. I head in today to get them(50 miles 1 way). Get there and they said it wouldnt be til Saturday. They had to order them from Texas instead of Ohio. I more than enough let them know what I thought about that..

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors

I like the Cobra R's, but has anyone seen a set of the 2000 Cobra R's like on the real Cobra R. They are 18's and so looked so sweet on a Mustang I saw the other day.

------------------
89' 5.0 GT Convertible Mustang and a 69' Mustang Mach 1 Fastback. If you want to know the rest, buy the rights.
AOL name: Woodnutz351

I like the wheels but it just seems to me
like everyone has them. So I don't want them
for that. I like my stock Cobra wheels. But
I would like some roush 18" wheels.

I got tires, lifetime warranty and Chrome Cobra R rims (17x9, they are OE concepts) for 1300 bones out the door. Thanks to a friend at Belle Tire. It looks sweet, my car looks totally different. I will post pictures as soon as it stops raining and I can wash the car. I get so many compliments now.

I saw the 00 Cobra R wheels too, I wanted them for my car, but my buddy couldn't get them in 4 lug. I would have gone elsewhere, but I get a smoking deal. Rims I got listed for 310, and I got them for 200 a piece.

Mine are also 17*9 and i got them for 250 a piece..I will post as soon as i get some pics..

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors