HOW TO GET A 96 GT INTO THE 12'S
 

I HAVE A 96 GT THAT IS STOCK. IT IS A 5 SPEED AND ONLY HAS THE STANDARD EQUIPMENT PLUS KEYLESS ENTRY. I HAVE ABOUT $3500 SAVED AND WAS WONDERING IF ANYONE KNEW A WAY TO GET INTO THE 12'S WITH THAT AMOUNT OF MONEY.
THE ONLY MODS IT HAS RIGHT NOW IS FULL EXHAUST AND COLD AIR. THANX FOR YOUR SUGGESTIONS!

Try 3:73 or 4:10 gears, underdrive pulleys, Mass air meter, shifter, ignition, fuel pump , fuel regulator, 125 shot of NOS, and some slicks. Not sure about 12's, but will get close.
Or you could add a nice intercooled supercharger and then keep saving for other mods.

easiest way is a blower. it will definately get you close.(or nos) harder way is to do a heck of alot to the motor. i.e., heads,cams,intake,and all bolt ons. first is actually cheaper, all though second will only make it even faster when you do supercharge it. good luck and spend wisely http://www.mustangworks.com/interact...oard/smile.gif

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.

Easy
1.Gears
2. Free flow exhaust
3. Blower - a Pro-charger P1-SC w/intercooler

Proven with time and patience 12s timeslips will follow.

This will exceed the $3500 ya got now. http://www.mustangworks.com/interact...oard/smile.gif
Path has been laid.

Hmm, gears, good exhaust, lots of patience and fine tuning. Power adder of anykind would easliy help get you to near or into 12's. Maybe try adding a set of 99+ heads, I heard they are alot cheaper to buy then the FRP HIPO's.

------------------
2000 GT Laser red-5speed
MAC Cold-air Induction
MAC 2 1/2" cat back exhuast
275/50-15 Drag T/A's used at track
Best Quarter mile run to date: 13.50@99.97 (1.87 60')

Catback,h-pipe,3.73 or4.10 gears,150 shot of juice,and some good tires and you shuld be right there.

------------------
96GTRioredw/siverstripes Aeromotive fuelreg,SVO70mm,C&L80mm,Nitto's,NOS150,MAC uppper&lowwers,MAC ccplates,KennyBrown supersubs,Eibach Prokit,BBK treekiller,Flowmaster catback,MSD inline 43ghp pump,FRRP aluminum driveshaft,RamHD,STEEDA Quadw/adjuster,B&M ripperw/STEEDA stick,Autometer A/F ratio&Nitrous gauges on piller,FRRP 3.73.HELL YES I STREET RACE!!!!!!

1) 4.11 gears
2) 99+ heads
3) 125 hp shot of NOS
4) sticky tires
5) 65mm throdle body
6) 70mm mass air

don't know about the cost but that will get you in the 12s

------------------
1990 Dodge Dynasty with 175,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"

1. Stock 99+ heads ported and polished ($1200)
2. Custom burned chip ($500-700)
3. 4.10 gears ($400 installed)
4. Offroad H pipe ($130)
5. Steeda or ASP pullies ($160)
6. Set of Welds with DR's ($850)
7. Drop some weight out of the car
8. Dump the Cold Air (they are known to loose power on our cars.
9. Practice at the track

------------------
00 GT, MAC Offroad H, Steeda Pulleys, Steeda Timing Adjuster, FMS 4.10’s, Flows w/turndowns, UPR shifter, UPR subframes, UPR LCA’s, Air Filter, Lakewood 70/30 & 50/50, Weld Pro Stars, Nitto DR’s, 253.8RWHP/292.8RWTQ
Best on DR's 13.09@103.92 (1.81 60ft)
Best on ET Drags 12.99@104.60 (1.67 60ft)
M/M 100
88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool…

I agree with mustang92. Look at his car. 99heads unported and he hit 12's. I say go that route. The 99 heads are only $350each.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

Definitely go with a supercharger. ATI to be specific. With the air-to-air intercooler, you'll LOVE the increase. E-mail me for details.

Two Words,

PAXTON NOVI! http://www.mustangworks.com/interact...board/wink.gif

------------------
Greg Banish
President, Detroit Speedworks, Inc.
'93 LX Turbocharged Road Racer
'00 Bad-Ass F150