|
Mods for the Bullitt
Looking to maybe add some mods to my Bullitt. I don't really wanna go expensive right now, looking to spend maybe about $1000 at this time. What way should I go to get the most horsepower? Thanks for your replies.
------------------ Just a stock 2001 Bullitt |
Quote:
|
Just out of curiosity, where can you find what number your Bullitt is?
------------------ Just a stock 2001 Bullitt |
You could get exhaust, pulleys, H pipe, gears.
Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.55@107 Motor |
I think the bullit allready comes with underdrive pullies, so I wouldnt start there. Also, I think the catback is allready better than on a gt, so this is what I would start with.
1. offroad H or X. I have the Mac offroad H, it's cheap ($109), but if I had to do it again i would without question go with a Dr. Gas offroad X, It is a little pricey ($295), but well worth it in my opinion. The Dr Gas has to be welded to fit, and I know a place in Fort Worth that will do it pretty cheap, most places wont touch it because it dosent have cat's. 2. C&L 80mm Max Flow kit ($245). I picked up 9rwhp/10rwtq with this alone ( only got 11rwhp/15rwtq from the H and pullies combined). 3. Gears, 3.73's or 4.10's. My pick would be 4.10's. 4. Drag radials my .02 ------------------ 00GT 255RWHP 302RWTQ Mac offroad H, C&L 80mm MAF, March pullies 8.9 @ 78mph 2.1 60' stock tires/Hot Texas weather |
The Bullitts do not come with underdrive pullies so add that to your list.
------------------ 00 GT, MAC Offroad H, Steeda Pulleys & Timing Adjuster, 4.10’s, Flows w/turndowns, UPR shifter, UPR Pro Series LCA’s, Lakewood 70/30’s & 50/50’s, 253.8 RWHP/292.8RWTQ 12.91@101.93 (1.74 60ft) M/M 100, 7085 2001 Mod Motor Shootout 2V NA Champion Recent Pic from Moroso |
| All times are GMT -5. The time now is 07:16 AM. |