cleavland 4v heads on a windsor block
 

Does anyone know what i need to do to put cleavland 4v heads on a stroked 408-inch windsor short block? & what i need to do to put it in the place of my old 302 ( engine mounts, ect...)

Please Help. thanks

you will need pistons for the canted valve heads.you will need a diffrent intake you can use one for yates heads but you have do alot of modfing to it.there was a company that made a intake called the trackboss but they are hard to find.you will have to block off the big water pasges on the head and drill a hole in the intake face side of the head.i would find a intake first before i done anything else

You know it's probably cheaper to just find yourself a set of aftermarket trick flow heads to put on your motor. Or go find an early 351c short block somewhere. Why don't you just sell the 4v cleveland heads and pay for the machine work to put larger valves in your heads you have now. I've got 2 sets of 4v cleveland heads and it's way cheaper to just modify my Windsor heads or even buy some already assembled heads for racing. You know you can get good money for even bare 4v cleveland heads (the 2.25 heads).

Oh yeah, the engine mounts for a 351C are the same as any other small block Ford. Just remember the 351C is nothing but big block heads on a small block motor. The 260 - 351C all took the same mounts.

wha ur talking about is making a "clevor" motor..i was thinking it b4 but weighed the options and it was much better and alot cheaper just to but aftermarket heads..this was the rage b4 thier was soo many aftermarket head companies out there..now its just not worth it

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..

Check out this link, it will give you the basics.
http://www.themustangshop.com/index.cfm?pg=clevor.cfm

------------------
Moxie Racing