Electric Fuel Pressure Gauge HELP!!
 

I am going to install the AutoMeter electric fuel pressure gauge tomorrow, but am totally confused. Where do I hook the sending unit to, and where and how do I wire it into the ignition switch??? The damn diagram they sent with it assumes that you are an electrical engineer or something. ha! I know I sound like a complete idiot, but any help would be great. josh

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

I mounted the sending unit in the fuel line.
There should be a npt port by the pasanger side valve cover in the fuel line... thread it into there. And as far as the ignition switch, all you have to do is find a wire that is only on when the key is on the on position. If you have a test lite or a voltage tester it will be easy.

------------------
Blown 347 W/Canfield heads, solid roller cam, track times this spring mid 10's or bust

93lx 5.0 daily driver

eh buddy, looks like wads bailed your *** out....i dont have anything to add to his **** , but i know you gonna be reading this before you hit my house in the morn, so bring two of your jack stands over with ya, that way, we can put my **** up on all 4 corners for more clearance. anyway dude, see ya in a couple hours.

yeah, i'll bring those along with my tester. it's got a light on it to find the "hot" wires for the ignition. I thought that's what we had to do, but wasn't sure. don't wanna fry my entire car. anyways, i'm headed out the door now...cya.

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************