FUEL LINES: Help please!
 

Well, I guess I am officially an Idiot. I've never been more pissed in my life. Anyways, I was going to install an NPT fitting for the sending unit for my electric autometer fuel pressure gauge...and i tightened down the fitting too much and broke it off inside the shrader valve port. anyways, i have to get a new section of the hardened fuel line, but no one has one. and now, i have to buy another fitting too. does anyone know how tight to put the fitting, or if i should use teflon tape on it?? thanks a lot..."ticked off josh"

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

ttt

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

You tighten it until it doesn't leak. I recently installed a fuel pressure gauge on the schrader port. If your fitting doesn't have an o-ring, than use teflon tape. When I tightened up my fitting to what I thought was pretty tight, it leaked. So just tighten it up until it stops leaking, and check it once in awhile.

------------------
87 GT, BBK shorty's, offroad H-pipe, ASP pullies, 70mm T.B., Cobra intake, no smog pump, Windsor Jr irons, Comp cams 1.6 rollers, F303 cam, H.D. export W.P., Tri-Ax, FMS subframes, Battle boxes, SSM liftbars, FMS King Cobra clutch, mass-air conversion, 73mm C&L, 24lb injectors, BBK fuel pressure regulator, 3/8" no EGR spacer, and other piddly sh*t.

<a href="http://www.mustangworks.com/cgi-bin/moi-display.cgi?1544">
Click here</a>

anyone have a clue where i can get that new piece of fuel rail? no junkyards have one and i'm sure the dealer will bend me over if i order one from them. josh

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************