MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   I Need Tech Advice! (http://forums.mustangworks.com/showthread.php?t=1755)

Mean50 03-19-2001 11:27 AM

I Need Tech Advice!
 
My car does not feel as strong as it use to and it sorta misses sometimes. Someone told me the injectors were too big but I tried my buddy's 24 lb injectors and his Mass Air. When it was cold it would miss really bad, popping back through the exhaust. Is there any was the computer in the car could be bad? Sorry to post this on here, but I need quick advice so I can start running some people.

------------------
89 LX Coupe
306, 10:1 compression, Holley Heads, Intake, and Cam package, 70 mm Throttle body and Mass Air, 30 lb injectors, 255 lph fuel pump, 1 5/8" full length headers, Flowmaster 2 1/2" American Thunder Cat back system, Centerforce dual friction clutch, 4.10 gears
50-175 hp Nitrous Works kit, 5" Auto Meter Shift Light

Kevin Price 03-19-2001 02:03 PM

You will get a much better response in our tech section.

Moved to Windsor Power

------------------
SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle
of giggle gas. My Car

White5.0 03-19-2001 11:13 PM

where you at in VA?

pull all your spark plugs and look at them to make sure all your cylinders are running with the same consistancy, just look at the colors, its pretty obvious, then work from there to figure if you need more or less fuel or see if its burning oil

84_GT350 03-20-2001 03:31 AM

Popping or a backfire through the exhaust can sometimes be caused by inadequate amounts of fuel. It sounds like you motor *might* be able to use 30lb injectors...but maybe not. Like White5.0 said, pull your plugs and look at the color(s) and go from thete.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s


All times are GMT -5. The time now is 01:47 PM.