91 T-bird 5.0 HO?
 

a friend of mine has a 91 thunderchicken and he told be he had a 5.0 in it which i knew that was entirely possible but when i went to look at it the plate on the intake said 5.0 HO, it looks like the same intake on the 94-95 5.0s where it elows out to the TB, is this the roller motor and does it have the same E7's as stangs? i wasnt aware that t-birds had the HO motor, is it the same one as ours or what? can i show him the free HP things that work for stangs or will it not work on his? oh yah, does he probably have the 2.73 gears too?

------------------
88 Notchback 5.0, 3.73's, Explorer intake, pulleys, Crane 1.7's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after rocker and intake install

[This message has been edited by fiveohpatrol (edited 03-20-2001).]

The free horsepower things should work, they apply to lots of fords. I would bet that it is the HO.

are all HO's roller motors with E7's?

------------------
88 Notchback 5.0, 3.73's, Explorer intake, pulleys, Crane 1.7's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after rocker and intake install

Im pretty sure it is the same motor except for the intake manifold, which costs the t-bird a few horsepower. I think they were rated at 210 instead of 225 due to the restrictive intake, which was required for hood clearance on the t-bird.

------------------
1993 GT/AOD
'93 Mustang GT