Jaz Race seats install... HELP.
 

I was trying to install my Jaz race seats today. And after getting everything out I went to put the seats back in.

First off the mounts summit sold me were complete crap. So I decieded to try and use the stock mounts, but they werent the correct width. So I tried to use some sheet metal to attach to the Jaz seat and then to the stock mount. It worked, but it ended up being way to flimsy once I got it in the car.

Does anyone have any suggestions how to rig it up with the stock seat mounts?

Thanks,

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, 2 1/4" exhaust, and 4.10's.
332RWHP@5500
351RWTQ@3750
Runs on 87 Octane!

There was a post on here awhile back about the install. You might try doing a search to find it. Good luck.

Oh yeah, I think Rick91GT on here installed a set. If you can get ahold of him he might be able to help ya.

------------------
Indiana Stangers Association
Buy your parts here

those things look nice???..i was ganna go with sparco...what is the going rate for the jaz seats

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

$75bucks

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, 2 1/4" exhaust, and 4.10's.
332RWHP@5500
351RWTQ@3750
Runs on 87 Octane!

Hey Sky I guess you saw my reply over at The Corral? They really don't fell that bad so far but my cars not together so I havn't driven it yet, lots more support then the stock pieces. A little awkward with the new cage though http://www.mustangworks.com/msgboard/biggrin.gif

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

Hey Sky if you can't come up with something I can make you a set of them like mine if you want. It would cost a little, I don't know If I have the metal, if your interested drop me line at home Rick91GT@onemain.com I'm working on my cage tonight so I will get back at you later tonight after 10:00pm EST. I'll try to get a pic maybe tonight or tomorrow.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

Thanks for the offer Rick, I appreciate it! But I think I've got it figured out. I got the metal today and I"m going to have it cut at a machine shop tomrrow. Gotta have this all ready to go saturday for carlsbad!

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, 2 1/4" exhaust, and 4.10's.
332RWHP@5500
351RWTQ@3750
Runs on 87 Octane!

Hey Sky, good luck this weekend I'll be looking for a post on those new times, prove all those naysayers wrong.

When I get my motor together and semi tuned I'm going to get mine on dyno and I will be at the track before that, can't wait to see my numbers, what will they say then. http://www.mustangworks.com/msgboard/smile.gif


------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!