3 carbs on an inline six
 

Hello fellow Mustang owners. I was wondering if anyone here has or knows someone with a early mustang with a in-line six in it.
I have a 66 with a 200 ci. in it and i wanted to put a manifold on with three weber carbs.

Has anyone done that ?
How is it?

If you're looking to buy such a set-up, or just want more info, go here:

Clifford

And scroll down to page 18 (pdf download).

Take care,
-Chris

It's not as easy as it sounds. If you look closely at you motor you can see that the intake log and the cylinder head are one piece (you cant remove the intake). To put multiple carbs on these motors you have to cut and weld new carb base plates on to the intake. Your best bet would probably be to order a 1 to 2 barrel adapter plate from Clifford. You could also go junk yard searching and find a 250ci inline 6 cylinder head with a 2 barrell allready on it, mill it to get the compression back where it needs to be, and bolt it on. With the newer cylinder head you would get the benifits of better flow and hardened valve seats. Hope I could help some.

Come visit the 'Inline Experts' over at www.FordSix.com and check out the forums.

Al

every time I see a picture of a mustang with a 6 in it, I always think, "Man, theres so much room for a turbo in there". If I had a 6 that's be where I'd be putting my efforts.