MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Fuel Rails from Excessive Motorsports (http://forums.mustangworks.com/showthread.php?t=1968)

Stang_ROTY 03-24-2001 09:12 AM

Fuel Rails from Excessive Motorsports
 
I heard that the Quality Control on Fuel Rails are horrible. I just got my set of 1/2 in. rails from Excessive Motorsports. How canI check to see if these are a good set?? What am I looking for as far as workmanship??

------------------
In-progress Street Legal
351..(So far)Edlebrock Performer RPM head, Upper&Lower Manifold..Crane Gold 1.6 Rollers..BBK 70MM TB..Full Cartech Fuel System..30lb Injectors..
Sothside Machine bars&sub-frames..Air Bag rear end..3.73's..???Tranny

84_GT350 03-24-2001 04:06 PM

One, the main thing I'd look for in a fuel rail is that it wasn't made by Excessive. Hehe. But seriously, first thing I'd do would be to make sure the bolt patterns line up on the intake. Second, compare it to a stock fuel rail. Make sure that it's even bigger than the stock piece. Check for any obvious flaws as well...like nicks and dimples in the metal. Just use some good judgement and common sense.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

stangbang 03-24-2001 05:24 PM

Just a little word to the wise. If you are happy with your order from excessive then consider yourself very lucky. But if I were you I wouldn't push my luck.These guys SUCK!
I will never buy from them again!

Stang_ROTY 03-24-2001 07:30 PM

After taking a good look at these rails I think I'm sending them back. When they drilled the holes they went too far and totally grinded into the inside of the rail. this really sucks! What type of workmanship is this crap! I'll never buy from them again. This ain't worth $150.00

------------------
In-progress Street Legal
351..(So far)Edlebrock Performer RPM head, Upper&Lower Manifold..Crane Gold 1.6 Rollers..BBK 70MM TB..Full Cartech Fuel System..30lb Injectors..
Sothside Machine bars&sub-frames..Air Bag rear end..3.73's..???Tranny

Stang_ROTY 03-24-2001 07:33 PM

Any suggestions where I can get a quality set of fuel rails for a Cartech fuel system??

After taking a good look at these rails I'm sending them back. When they drilled the holes they went too far and totally grinded into the inside of the rail. this really sucks! What type of workmanship is this crap! Does anyone know how much they charge to return stuff ? I'll never buy from them again. This ain't worth $150.00

------------------
In-progress Street Legal
351..(So far)Edlebrock Performer RPM head, Upper&Lower Manifold..Crane Gold 1.6 Rollers..BBK 70MM TB..Full Cartech Fuel System..30lb Injectors..
Sothside Machine bars&sub-frames..Air Bag rear end..3.73's..???Tranny

Rick 91GT 03-24-2001 09:20 PM

I wish you the best of luck getting credit from those A******S, it took 3 months to get credit for a $23.00 Speedo gear.

Doesn't Cartech make rails? Try a set of Paxtons, or Vortech or Aeromotives.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

DirtKing 03-24-2001 11:41 PM

My paxtons were pretty weak too, so I went to the enemy and bought vortech rails. much better quality!

------------------
88LX notch, Speedpro EFI Procharged!

Stang_ROTY 03-27-2001 06:49 PM

Thanks,
I think I'll get the Vortech's from Summit.

Well, I called Excessive and they tried to sell me an Aeromotive fuel system saying that it was much better than the Cartech. They also gave me a return number but they only gave me credit. What can I get that they can't possibly screw up for a 150.00??

------------------
In-progress Street Legal
351..(So far)Edlebrock Performer RPM head, Upper&Lower Manifold..Crane Gold 1.6 Rollers..BBK 70MM TB..Full Cartech Fuel System..30lb Injectors..
Sothside Machine bars&sub-frames..Air Bag rear end..3.73's..???Tranny

xspeed02 03-28-2001 12:22 AM

Can't you dispute the charges on your credit card?

5.0 Coupe 03-28-2001 08:17 AM

xspeed,
These guys should take back the fuel rail as long as it was not used. Make sure you have a tracking number when returning. If they don't credit you within a couple of weeks of receiving it you can call the credit card company and tell them this information. I have had to do this a few times, and have always got a refund. The only thing you will lose is the shipping charges.

------------------
89 (GR40 Griggs)Hatch
89 Coupe
90 Coupe


All times are GMT -5. The time now is 04:02 AM.