|
Estimate HP at the crank?
MAC Cold Air Intake
MAC Cat-Back exhaust 75 MM Mass Air Flow Sensor Trick Flow Street Racing edition Total HP? Also, ~ what would it be if I got a new cam, mac equal shorties, mac off-road h-pipe...total hp approximately? Thanks, DoranW |
Trick flow street racing edition?? what is that?? trick flow heads?? intake?? cam??
|
Also, what year mustang are you talking about.
|
That would be intake (sorry :))
1990 Mustang LX 5.0 |
Id guess around 250ish crank hp. just my guess.
later Dan 95 rio red cobra #2021 |
240 at the crank, that's being generous. Don't put on an aftermarket intake unless you have aftermarket heads, you'll feel no difference, it won't be any faster. The mass air is going to do nothing for you either, the cold air might add 1hp "maybe", the intake will add nothing unless you have aftermarket heads, and the cat-back "might" add 5hp. Unless you add heads, and a cam, headers aren't going to add much at all, if any hp. The off-road h-pipe you might pick up 5-10hp, but it's a good mod. I would say you'd be around 195-200rwhp if your car is in perfect tune.
|
Dang, I thought that might be the case.
What if: Stuff I have now + heads cam h-pipe headers And my car is in just about perfect tune, if not perfect. Thanks, DoranW |
The power is in the heads. It just depends on what heads are in your budget. With the right intake, heads, cam, and all the bolt-on things you need to go with them, you can have 300rwhp+ easy. Mid to low 12's are pretty accomplishable with the right heads, cam, intake combo. But we all have a budget, so I'd start with your catback. :)
|
| All times are GMT -5. The time now is 04:32 AM. |