sn95 five lug conv for a fox
 

well i got the tires put on my 98 cobra wheels i have the car up on jack stands and monday i am going to pick up the spindles, rotors and calipers from a 94 for the front end conv has any one out their done this conv i have seen a few sites that say diff things about the lower balljoint and the brake line to the caliper some say to get a washer for the balljoint some say to replace it with the sn95 piece also some say the brake line from the sn95 caliper will work with some modification but they werent specific on the mod and some say to get the steel lines from maximum motorsports my ? is what have you done to install this front end on your car any help will be greatly app

thanks

i am going to be doing this swap on my project as well, and the thing i know about the balljoint is that it still will work, the old one is just taller. the cotter pin will not be butted up against the nut, it's like 3 threads high. three threads up isn't a big deal, the nut shouldn't loosen even without the cotterpin, it is just extra precaution. You should be fine. Let me know how it turns out.