MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Modular Madness (http://forums.mustangworks.com/forumdisplay.php?f=17)
-   -   Underdrive Pulleys...please Help!! (http://forums.mustangworks.com/showthread.php?t=21232)

03-26-2002 01:36 AM

Underdrive Pulleys...please Help!!
 
Considering I really dont have many mods, will I feel a noticeable difference with Steeda underdrive Pulleys? Is it worth buying them? Will the Bassani X pipe w/ high flow cats VOID my factory warranty? Any other suggestions welcome...

Thanks

StoplightWarrior 03-26-2002 02:06 AM

In my opinion, the Bassani Xpipe was the BEST mod I have done to my GT. The sound is incredible, and the car pulled SO much harder. I put the steeda underdrive pulleys in as my first semi-major mod, and I did feel a difference, like 8-10hp. If you put some pulleys, x-pipe, 3.73 gears, cold air/MAF and some drag radials, you will have a fast stang! Let me know if I can help any further.

03-26-2002 02:14 AM

Thanks for the info.....Do you know if the bassani X pipe w/cats will VOID my factory warranty? Did the X pipe trigger your check engine light to come on?

Blue01GT 03-26-2002 02:45 AM

Its so funny you ask that cause i ust had a triple hitter last weekend. FIrst i got 3.73s and its a good boost in acceleration i highly recommend it. then immidiately after i put on Steeda UD pulleys and i barely noticed anything, but it does help enough and easy to install if you got an impact wrench. The next day i did a Steeda Timing Adjuster and with 92 octane i set the timing to 14* and it runs really quick now!!! im talking real hit in the @$$.

Im taking it to the track on wednesday i cant wait to see my ne time! (my BONE STOCK time was 14.56)

If you get UD pulleys, you might as well get the Timing Adjuster while your at it. And be sure to use 92 octane!!!!

I will post timeslips after this wednesday so you can seee what im talkin about!

Peace!:cool:

Rocket 99GT 03-26-2002 03:27 PM

"Blue01GT"

If I set my pulleys to anything but 10 my car start "bucking". Steeda does say this is normal but I just hate that bucking, even when I put 94 octane it still does.

Honestly I did not noticed any gain in horse power, mind you though that if you are planning to have NOS or induction you will need some type of adjustment gadget.

.................................................. .................................................. ...


Mustang 99GT
Under drive pulleys, subframes, 3.73, sport Lowering springs, strut tower brace, caster/camber plates, rear sway bar, tokiko illumina adjustable shocks/struts, upper&lower rear control arms, timing adjuster, 245x17 Michelin pilot, high performance brake pads,k&n filter (no silencer, no spare tire).

StoplightWarrior 03-26-2002 03:31 PM

Quote:

Originally posted by StangGT2002
Thanks for the info.....Do you know if the bassani X pipe w/cats will VOID my factory warranty? Did the X pipe trigger your check engine light to come on?
It will void the exhaust portion of your warranty, but no single mod can void your entire warranty. By law, Ford has to prove that the part you installed caused the problem. And yes, the x pipe triggered my CEL. I got the chip burnt to fix that, though.

czstang1701 03-26-2002 08:09 PM

Quote:

And yes, the x pipe triggered my CEL.
whats the CEL?..

03-26-2002 08:53 PM

CEL= Check engine light

Lizard King 03-26-2002 10:01 PM

SO DO THEY WORK WELL OR NOT - UNDERDRIVE PULLEYS!

I like the price. I have been told by some novices that they can damage the A/C and screw around with the Mach460 system.

ForPointSex 03-27-2002 08:34 PM

I have installed steeda's pulleys and timing adjuster. I did not notice harder pull. My headlights go dim at idle, but the charging system is fine. I have my timing at 13* and have no bucking problems. WIth gas prices going up, i think i'll set it back to 10* and run regular gas. I'll put it back to 13* in the summer months.

MM&FF this month showed the steeda pulleys added 3 HP, 12 lbs-ft torque. The timing adjuster at 6 HP, 15 lbs-ft torque.

I would love to put in my 3.73 but I don't have the tools and skills to do it. oh well.....

stylin99 03-28-2002 01:53 PM

Quote:

Originally posted by Lizard King
SO DO THEY WORK WELL OR NOT - UNDERDRIVE PULLEYS!

I like the price. I have been told by some novices that they can damage the A/C and screw around with the Mach460 system.

Just put my pulleys on last weekend and definitely feel the HP gain. Pulls much harder now. Usually don't notice the gains on some mods but this I did. All the accessories still work as they did before. AC's cold, radio's loud, lights are bright....definitely worth looking into.

steedamustang01 03-28-2002 06:07 PM

WHAT'S UP BUDDY! IT'S STEEDAMustang2K1 NICE TO SEE YOU ON. HAHA. N-E-WAYS I CAN'T BE MUCH HELP ON THE PULLEYS, I'M NOT SURE BUT AS FAR AS GEARS GO WITH 4.10'S I HAVE HAD TONS OF BUDDYS THAT GO WITH 3.73 AND THEN KICK THEM SELF IN THE @$$ FOR NOT GOING WITH 4.10'S. LOOK AT THE POST I DID ON WHAT GEARS TO GET FOR A 2001 GT. AND YES YOUR IS A 2002 AND IT'S NO DIFFERENT. BUT YOU HAVE TO CHECK OUT WHAT MUSTANG92 WROTE. (I THINK THAT'S HIS ID NAME) HE KNOWS HIS $H!T MORE THAN ALMOST ANYONE ON HERE. READ WHAT HE WROTE ABOUT THE 99+ STANGS AND WHAT GEAR TO PUT IN THEM. IM ME LATER. DE'JAY.


All times are GMT -5. The time now is 10:06 PM.