|
how to remove hitch with out blowing car up?
ok guys..when i bought the car it had a small hitch on it with a cover..my dad tryed a braker bar on it just bust the nuts off but he got one off and then the other one just spun..and the rest of the bolts you cant get to less you take the bumper cover off....then i need new plastic pin things...and i could torch it off but that would be dangerous with the gas tank right there.........take a look at the pic and see what you think
http://www.angelfire.com/wi/demon/mustangback.jpg ------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H Future Mods:3.73's,Pro 5.0,Shifter knob,FMS 9mm wires,E303 cam,cobra intake |
damn thing..just click the link http://www.angelfire.com/wi/demon/mustangback.jpg
------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H Future Mods:3.73's,Pro 5.0,Shifter knob,FMS 9mm wires,E303 cam,cobra intake |
What pic?
------------------ 1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green |
The link brings up the same thing
------------------ 1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green |
well crap!! click this link http://www.angelfire.com/wi/demon/index2.html
------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H Future Mods:3.73's,Pro 5.0,Shifter knob,FMS 9mm wires,E303 cam,cobra intake |
also..i have bumper inserts but the dumb lady that had the car before me painted the mustang gt insert with paint..anyone have any idea how to remove the paint thats chiping out??
------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H Future Mods:3.73's,Pro 5.0,Shifter knob,FMS 9mm wires,E303 cam,cobra intake |
If I were you, I'd just yank the bumper off...it'll take you about 10 minutes or so...very easy to do
It looks like it could use some shimming in the middle anyway. You don't want too much heat near that sucker, they are WAY too sensitive And those "pin things" should come off in one piece if you are careful ------------------ 1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green |
Take it to a reputable muffler shop with a full tank of gas (fumes are bad)... it should be cheap, and they've got insurance ;-)
|
so green92lx your saying just take the bumper cover off and if im careful the pins should be reuseable? and how do i shim the middle?
------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb |
I actually want one of those for my 90 notch so I can tow my snowmobile occasionally. If you can get it off in one piece I'll throw ya some cash for it. I installed the same basic hitch ( looks like a Reese) in my lumina. The mounting bolts are drilled through the bumper housing and trunk pan. Can you get a wrench on both ends of the mounting bolts? If the threaded ends are on the outside, the nuts are probably frozen pretty good.
------------------ Frank W 90 5.0 LX coupe Daily driver. Silencer removed, K&N filter. Flexalite fan, 3 core radiator. FMS flywheel and Clutch Finally rebuilt T-5. 74 Chevy Laguna Type S-3 305 apart in garage, getting a 454 to put next to it www.chevellepages.com/folingo |
chevyguy...i can probubly get the hitch off in one peice but i might end up torching a couple bolts off..i know one on the drivers side i tryed breaken it and it just spins..body is in the way cant get a wrench on the nut...
------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb |
oh yea..dose anyone have any ideas bout the paint in the bumper inserts?
------------------ '91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb |
Use anything that will fit in there. On my toilet 89 GT I used wood shims...kind of a hack but the car was **** anyway, even though it was a stang
------------------ 1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green |
| All times are GMT -5. The time now is 12:19 PM. |