MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   S-Trim: Staus...ORDERED!!!! (http://forums.mustangworks.com/showthread.php?t=2205)

quick89gt 04-03-2001 07:19 PM

S-Trim: Staus...ORDERED!!!!
 
Well, I finally saved up almost enough money and for my b-day, my pops pitched in the rest. I ordered my Vortech S-Trim from Summit Today and it should be here Friday. I had a 10% off coupon from them, so I picked it up for $2,600...no too bad, I think. Anyways, thanks to all of you who talked with me and gave me advice on which one to go with. Hopefully, I'll be very, very pleased with this setup and my mods listed below. I just have to save up for 30#/hr fuel injectors now. Well, thanks again everyone...just wanted to share my EXCITEMENT!!

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

white00GT 04-03-2001 07:28 PM

I'm not sure but I think the injectors might be in the kit, at least I know they came with my blower.

------------------
2000 Mustang GT

92Rustang 04-03-2001 09:43 PM

Congrads dude.I'm still waiting for a new motor, but then the charger will come. If you need any help let me know I'm local. Good luck with the install.

------------------
Check my site for mod
www.fordmustanggt.com

Nutty 5.0 04-05-2001 08:29 PM

Cool. You won't be disappointed. That's a good price. I bought mine the end of Dec from Summit and price matched to get my polished S trim for $2945 delivered, so I'd say you got a great deal. Wish the 10% coupon was around earlier!!!!

I just dynoed mine and got 435 to the rear wheels. It passes emissions with flying colors and made that power to wheels thru cats. I was told that I am really pushing the limits of the injectors, so plan to buy 42's in the near affordable future!

The injectors DON'T come with your year kit.

------------------
-Nutty 5.0
93 GT Red/Grey
S trim, Edelbrock 6037 heads, E cam, BBK longtubes w/cats, 3 chamber Flowmasters, BBK Alum. underdrive pullies, Cobra intake, Accel fuel regulator, BBK 70mm t.b., 73mm C&L meter, ram air, 1.7 roller rockers, Mac upper and lower strut tower braces, FMS lowering springs, Factory Five upper and lower control arms, Speedware Cobra R 17X9 wheels, 3.73 gears and ram air hood, Cobra wing, and grille insert.

quick89gt 04-05-2001 09:26 PM

what kind of H.P. numbers do you guys think i can expect with my combination and the S-Trim?? josh

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

Nutty 5.0 04-06-2001 02:41 PM

Our combinations aren't too far off from each other. From what I learned dynoing my car last Tues, you should see 400-450 at the wheels running the stock Vortech 3.33" pulley. That's to say your injectors hold up with enough a/f ratio. They say simple combos like ours do that above hp all day long.

------------------
See my car HERE
93 GT Red/Grey
S trim, Edelbrock 6037 heads, E cam, BBK longtubes w/cats, 3 chamber Flowmasters, Cobra intake, Kirban fuel regulator, BBK 70mm t.b., 75mm Pro-M meter, 1.7 roller rockers, Mac upper and lower strut tower braces, FMS lowering springs, Factory Five upper and lower control arms, Speedware Cobra R 17X9 wheels, 3.73 gears & more.
DYNO=435.6 hp/405.1 tq at rear wheels.

quick89gt 04-06-2001 06:43 PM

SSSWWWWEEEEEEEETTTTTTTTTT

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************


All times are GMT -5. The time now is 08:50 PM.