MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Now do I test (IAC) (http://forums.mustangworks.com/showthread.php?t=22062)

Stang Runner 04-09-2002 10:08 PM

Now do I test (IAC)
 
thats it right on the Tb How do I test it?? with a Volt Metter?? Thx.

crazy5.0 04-09-2002 10:52 PM

If your idling good and when the car is cold it should idle high around 1200rpm for a few seconds and then go down then it's working properly. It would be a good idea to take it off which is located on the throttle body and clean it with some carb cleaner.

Stang Runner 04-10-2002 03:51 PM

Thats Fine and Dandy But How to I test it???? With a Volt Meter.
The IAC is new But I think it is Bad I have worked Hrs!!! on it yes Hrs. I have not vac Leak and I am sure it Has to be that of the ECU is messed up. MAP sensor maybe. Cant any one help???

DRASTiK 04-10-2002 05:23 PM

disconnect it while the car's running. If it changes the idle drastically or the car just dies, then it's working. If there's no change, then replace the piece of &$^%.

Dave

Stang Runner 04-10-2002 05:46 PM

I cant say I Fixed it But I have the car going Thx for the help.

FordFasteR 04-10-2002 08:17 PM

how did you get it going ?

what did you do ?

what are your problem symptoms ?

come on give us some details to work with here....

gtsr515 04-11-2002 01:51 PM

Very simple, you go to a auto parts store, buy an EEC tester.


All times are GMT -5. The time now is 11:20 AM.