Who sells the CHEAPEST fiber glass hood?
 

I need a new hood for Marbles, and all the junk yards want waaaayyyy too much $$ for one. And any i find cheap on line require a bank loan in frate charges. I heard of a company that sells them for about $150. Fit and finish do not matter. I will make the darn thing fit, I just need one cheap. Thanks. Light Em Up!! http://www.mustangworks.com/msgboard/smile.gif

Would it matter if its a bolt on pin type?? If not cervinis sells'em for like 189..Thats the only place I would know of off hand.

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Cal

"Who sells the cheapest hoods?" Most likely Cincinatti Composites.

-------------------------------
'79 Mustang Coup
4" Cowl
Weld wheels (15x6;15x8)
Stock 5.8L
C4 w/ shift kit
1 5/8" MAC shorty headers
Holley 750 CFM
Edelbrock Performer RPM intake
2.5" Off road H-pipe, 2-chamber Flowmasters
8.8" Rear end w/ 3.55 gears (Now that's more like it!!) http://www.mustangworks.com/msgboard/biggrin.gif
Front: 225/60/15 Rear: 255/60/15 Eagle GT II
14 x 4” K&N air filter (getting the Xtreme setup soon) http://www.mustangworks.com/msgboard/cool.gif

"Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

Cheapest hoods around: http://www.cincinnaticomposites.com/

Let us know how well it fits if you get one.

DO NOT BUY a cincinatti composite hood...they are all crap!!.....no matter how cheap it is, the quality is junk!!

------------------
TW Heads, Edlebrock RPM, 75mm TB, 75mm MM, Anderson N-2 cam, stock block, underdrives, paxton regulator, bbk 155 intank, 30lbers, motorsport alum rad msd ignition and coil, 3.73 gear, Tremec 3550, Motorsport HD clutch, K&N, hooker shorties, pacesetter h-pipe, and dynomax cat back, mac upper and lower control arms, no front sway bar. I think that's it. GO ILLINI!!!
Waiting for good weather for new times.

i agree a with hoods you get what u pay for

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

I know of a shop cheaper than that! Pick up the latest 5.0 Mustang mag and look for the black and white Cobra Auto Designs ad.

Cobra Auto design has Bolt on hoods for $219, Cinn Comps has them for $199, and pin ons for $159. Fit and finish don't matter right now. I know it sounds weird, but i just wanted the cheapest hood. Thanks all. Light Em Up! http://www.mustangworks.com/msgboard/smile.gif

My bad. I go the names mixed up. Cobra designs is cheaper. Light Em Up!! http://www.mustangworks.com/msgboard/smile.gif

Unlimited Products http://www.unlimitedproducts.com/mustang67.htm

------------------
347 (Coast High short block), 279/284 .493/.510, TFS TW, Stealth, 750, Flowtech hdrs, Dr. Gas X, 2 Chmbr Flowmaster, MSD 6AL-Dist.& SS coil, March serpentine pulley system, Art Carr C-4, Currie 9" w/3.55, alum Drv Shft, susp mods, Total Control subframes & tower braces, Trans Am Racing power dual master, 4 wheel disc
In a 66 coupe