south side lift bars
 

what do you guys think of them??

do they work well for a street driven mustang?

thanks,
adam

I have used the southside machine lift bars on the street and you get a very harsh ride. You transmite a lot of driveline vibration to the car there are no rubber bushings like other models. They get an A+ for helping in the traction department even on street tires they help a ton! I just use them at the track. I love the way they help on the street but not worth the noise or stiffness, Just my two cents.

What do you have to do to install them?

Do you substitute the lower control arms for them or do they bolt on over them?

They replace the lower control arms. You will need to drill holes in the control arm barckets that are welded to the axle. You will need a magnetic angle finder to measure the pinion angle of the axle and driveshaft. Make sure you have all parts (spacers) from whoever you order them from before you start the job. I had everything off and the lift bars half way on when I realized they didn't send me any spacers. The liftbars didn't help me that much, I have drag radials on too and I still have problems hooking on street. There are many pros that use them though, so I will stick with them and keep tuning. Good luck.

k, thanx

I am just trying to find the best way to better my 2.4 60' time:confused:,lol